How to Clean Nutribullet Blender Pitcher Like a Pro
How to Clean Nutribullet Blender Pitcher?
To clean a Nutribullet blender pitcher, start by powering off and unplugging the blender.
Remove the blade from the cup and rinse both the cup and blade immediately after use to prevent food from sticking.
Then, clean the pitcher by hand using warm, soapy water and a sponge.
For stuck-on ingredients, run the blender with warm water and dish soap for 20 to 30 seconds.
Nutribullet cups, lids, lip rings, and blades are dishwasher-safe but should be rinsed before washing.
Avoid using the sanitize cycle in the dishwasher as it can warp the plastic.
When cleaning the power base, wipe any spills with a damp sponge or towel, but never submerge the power base in water or put it in the dishwasher.
Allow the power base to fully dry before use.
To clean the blades, wash them by hand with warm, soapy water and a dish brush.
For a deeper clean, use a 10 percent dilute vinegar and water solution or lemon juice.
It’s important not to remove the gasket from the blade to maintain its effectiveness.
Lastly, it’s recommended to replace the blades every six months if the Nutribullet is used regularly.
Key Points:
- Power off and unplug the Nutribullet blender before cleaning
- Rinse the cup and blade after use to prevent food from sticking
- Clean the pitcher by hand using warm, soapy water and a sponge
- For stuck-on ingredients, run the blender with warm water and dish soap
- Nutribullet cups, lids, lip rings, and blades can be washed in the dishwasher but should be rinsed first
- Avoid using the sanitize cycle in the dishwasher as it can warp the plastic
Did You Know?
1. Did you know that the Nutribullet Blender Pitcher is dishwasher safe? Simply remove the blade assembly and place the pitcher on the top rack of your dishwasher for a convenient and thorough clean!
2. If you’re looking to remove tough stains from your Nutribullet Blender Pitcher, try using a paste made of baking soda and water. Apply the mixture to the stained areas, let it sit for a few minutes, and then scrub with a soft sponge or brush. Rinse thoroughly for a sparkling clean pitcher!
3. To prevent odors from lingering in your Nutribullet Blender Pitcher, try blending a mixture of lemon juice and water. This refreshing blend not only helps clean the pitcher, but also leaves a fresh citrus scent behind.
4. If you’ve accidentally left your Nutribullet Blender Pitcher unwashed for too long and it has developed a stubborn residue, try using white vinegar. Fill the pitcher halfway with vinegar and let it sit for about an hour. Then, scrub with a brush and rinse thoroughly. Your pitcher will be as good as new!
5. A handy trick to help maintain the clarity and shine of your Nutribullet Blender Pitcher is to wipe it with a mixture of distilled water and white vinegar after every use. This simple step helps prevent any build-up and maintains the pitcher’s pristine appearance.
1. Power Off And Unplug The Blender
Cleaning your Nutribullet blender pitcher starts with ensuring the appliance is safely turned off and unplugged. This simple step is crucial to avoid any potential accidents while working with water and cleaning agents. By powering off and unplugging the blender, you eliminate the risk of electrical shock and can focus on cleaning the pitcher effectively.
To clean the Nutribullet blender pitcher, you can follow these steps:
-
Remove the blade from the pitcher. This will make it easier to clean the pitcher thoroughly without any obstructions.
-
Rinse the pitcher with warm water to remove any leftover residue or food particles. Make sure to rinse it thoroughly to ensure cleanliness.
-
Use a mild detergent and warm water to clean the pitcher. You can use a soft sponge or brush to gently scrub the pitcher, paying attention to any stubborn stains or areas.
-
Avoid using abrasive cleaners or scrubbers as they can damage the pitcher’s surface or the blade.
-
Rinse the pitcher thoroughly to remove any detergent residue. Make sure there are no soapy or greasy residues left behind.
-
Dry the pitcher completely before reassembling it. This will prevent any moisture from accumulating and causing mold or mildew.
Remember, always handle the blade with caution as it is sharp and can cause injuries. Store the blender and its components in a safe place when not in use to keep them clean and in good condition.
“Cleaning your Nutribullet blender pitcher is an important step in maintaining its performance and longevity.”
- Remove the blade before cleaning
- Rinse with warm water
- Use mild detergent and a soft sponge for cleaning
- Avoid abrasive cleaners or scrubbers
- Thoroughly rinse to remove any detergent residue
- Completely dry before reassembling
Keep your Nutribullet blender pitcher clean and enjoy its optimal performance for years to come.
2. Removing And Rinsing The Blade
After turning off and unplugging the blender, the next step is to remove the blade from the cup. This is essential for thorough cleaning and prevents any food residue from being left behind. By removing the blade, you create easier access to clean the cup properly.
Once the blade is removed, it is recommended to rinse it immediately to avoid food particles sticking to it and becoming harder to clean later on.
- Turn off and unplug the blender.
- Remove the blade from the cup.
- Rinse the blade immediately.
“Removing the blade is essential for thorough cleaning and prevents any food residue from being left behind.”
3. Handwashing The Cup And Blade
To effectively clean the Nutribullet blender pitcher, handwashing it with warm, soapy water is recommended. The use of warm water simplifies the removal of any residue with minimal effort. Soapy water effectively breaks down stubborn particles, ensuring a hygienic cleaning process. It is best to use a sponge or dishcloth to gently scrub the cup and blade, ensuring a thorough cleaning of all surfaces and preventing any residue from being left behind.
4. Using Warm Water And Dish Soap For Stuck-On Ingredients
Sometimes, ingredients may stick to the Nutribullet blender pitcher, making it challenging to remove them. In such cases, warm water and a bit of dish soap come to the rescue. By running the blender with warm water and dish soap for approximately 20 to 30 seconds, you loosen any stuck-on ingredients effectively. This solution allows for hassle-free cleaning and ensures that your Nutribullet blender pitcher is spotless and ready for future use.
5. Cleaning The Power Base
While cleaning the pitcher is essential, it is equally important to pay attention to the power base. In the event of any spills, shut down and unplug the Nutribullet immediately. Use a damp sponge or towel to wipe away the spill and ensure that no liquid seeps into the power base, which could potentially damage the appliance. It is crucial not to submerge the power base in water or put it in the dishwasher, as this can lead to electrical hazards. Instead, focus on wiping any spills immediately to prevent any long-term damage.
6. Tips For Cleaning The Nutribullet Blades
The Nutribullet blades play a vital role in blending ingredients to perfection, and proper cleaning is necessary to maintain their effectiveness. It is recommended to wash the blades by hand with warm, soapy water and a dish brush. This method ensures that all parts of the blade are thoroughly cleaned. For a more intense clean, you can use a 10 percent dilute vinegar and water solution or lemon juice. However, it is important not to remove the gasket from the blade, as this may affect its performance. It is also essential to note that disassembling the blade or power base will void the warranty, so exercise caution when cleaning these components.
Important Facts
It is crucial to be aware of some important facts when it comes to cleaning your Nutribullet blender pitcher.
-
Replace the blades every six months: If the Nutribullet is used regularly, it is recommended to replace the blades every six months. This ensures optimal performance and prevents any dulling or ineffectiveness.
-
Cleaning cloudy cups: If your Nutribullet cups appear cloudy, you can clean them using a 10% solution of bleach to water. Simply fill the cups with the bleach solution, let them sit, empty and rinse them, wash with warm soapy water, and rinse again. Following these steps will successfully remove any cloudiness and keep your cups clear and clean.
-
Avoid disassembling the blade or power base: Disassembling the Nutribullet blade or power base will void the warranty. To keep your appliance in the best condition, always follow the manufacturer’s guidelines.
Taking the time to clean your Nutribullet blender pitcher properly ensures not only a hygienic appliance but also guarantees optimal performance and longevity. By following the steps outlined above, you can clean your Nutribullet with ease, maintaining its effectiveness and providing yourself with fresh and healthy blends every time.
Remember:
- Power off and unplug the blender
- Remove and rinse the blade
- Handwash the cup and blade
- Use warm water and dish soap for stuck-on ingredients
- Clean the power base with a damp sponge or towel
- Follow the tips for cleaning the Nutribullet blades.
Happy blending and cleaning!
Frequently Asked Questions
Can you remove the integrated blade from Nutribullet pitcher?
Certainly! We understand the importance of keeping your Nutribullet pitcher clean and maintaining its functionality. After you have finished blending, you can easily remove the integrated blade from the pitcher for cleaning purposes. This allows you to thoroughly clean both the pitcher and the blade, ensuring optimal hygiene and longevity of your Nutribullet. Simply detach the blade from the pitcher, wash them both separately, and reassemble when you are ready to use it again.
Can I put my Nutribullet pitcher in the dishwasher?
Yes, the Nutribullet pitcher is indeed dishwasher safe. You can conveniently place it in the dishwasher without worrying about any damage or deterioration. However, it’s important to note that the cups and to-go lids should be placed on the top rack of the dishwasher for optimal cleaning.
Why is my Nutribullet blender pitcher leaking from the bottom?
If your Nutribullet blender pitcher is leaking from the bottom, it could be due to a loose attachment between the cup and the blade. To fix this issue, you should remove the cup and blade from the motor base, ensure they are tightly attached, and reattach them. Another possibility is that the seal within the blade attachment may have become dislodged or damaged, causing the leakage. In this case, you might need to inspect and potentially replace the seal to resolve the problem.
Do NutriBullet blades get dull?
Over time, the continuous grinding and blending of various ingredients may cause the NutriBullet blades to lose their sharpness. While NutriBullet replacement blades are readily available for purchase on their website, users also have the option of sharpening the blades manually using a whetstone. This process restores the sharpness of the blades, ensuring optimal performance and efficient blending of food items.