How Do I Reset My Whirlpool Refrigerator Not Cooling? Tips and Troubleshooting Guide

How Do I Reset My Whirlpool Refrigerator Not Cooling?

To reset your Whirlpool refrigerator if it is not cooling, try the following steps:

1.

Perform a hard power reset by unplugging the refrigerator from the wall socket for thirty minutes, then plugging it back in.

2.

If there is no reset button, you can perform a factory reset by pressing and releasing the buttons located inside the refrigerator door.

3.

Press and hold the freezer switch or water filter icon to reactivate.

4.

Long press the refrigerator icon to reset the refrigerator.

5.

Power off the refrigerator, plug it back in, and it should return to its original settings.

6.

If the Control Board/Panel needs to be reset, press the door switches and the temperature button three times within ten seconds.

7.

To reset the refrigerator not cooling, press the refrigerator temperature button until the display goes blank.

8.

To reset the refrigerator after changing the filter or when the filter light is glowing orange, press the Options button, select Filter Reset, press the Confirm button, and wait for a beeping sound.

9.

Check for any obstruction in the main water line, such as a large piece of ice, and remove it if necessary.

10.

Allow up to 48 hours for the freezer to reach the required temperature if it is not cold enough.

11.

Clean the condenser coils if they are clogged or dirty and check the temperature dial on top of the refrigerator.

12.

Inspect the door seal for any damage or gaps and replace if needed.

13.

Check for any power failure signs, such as frayed or loose power cords and blown fuses.

14.

If the fan motor or condenser motors are faulty, they may need to be replaced.

15.

Regularly replace the water filter every six months and flush out the new filter with several gallons of water.

16.

To reset the compressor, unplug the refrigerator, turn off the freezer and refrigerator using the control panel, set the temperature control to zero, plug the refrigerator back in, and reset the controls.

17.

Perform regular maintenance to ensure the refrigerator lasts for 10-15 years.

Remember to exercise caution when working on electrical components and consider seeking professional help if needed.

Key Points:

  • Perform a hard power reset by unplugging the refrigerator for 30 minutes, then plugging it back in.
  • If there is no reset button, perform a factory reset by pressing and releasing the buttons inside the refrigerator door.
  • Press and hold the freezer switch or water filter icon to reactivate.
  • Long press the refrigerator icon to reset the refrigerator.
  • Check for obstruction in the main water line and remove if necessary.
  • Allow up to 48 hours for the freezer to reach the required temperature if it is not cold enough.

Did You Know?

1. The world’s first refrigerator was invented by William Cullen in 1755, but it wasn’t until around 1913 that the first electric refrigerator was introduced to households.
2. Whirlpool, one of the leading refrigerator manufacturers, was founded in 1911 as the Upton Machine Company. It later changed its name to Whirlpool Corporation in 1950.
3. Did you know that refrigerators don’t actually cool objects? Instead, they remove heat from the contents of the refrigerator, causing the temperature to decrease.
4. The cooling process in a refrigerator works by compressing a gas (usually a refrigerant like Freon), which makes the gas hotter. The hot gas then flows through a set of coils, releasing the heat into the surrounding air. As the gas cools down, it condenses into a liquid and is then used to absorb heat from inside the refrigerator.
5. If your Whirlpool refrigerator is not cooling properly, there are a few potential causes to investigate. Apart from checking the temperature settings and ensuring that the vents are not blocked, it might be necessary to clean the condenser coils, as a buildup of dust can hinder their efficiency.

Related Post:  How to Adjust Refrigerator Temperature Control for Optimal Efficiency

Hard Power Reset: Unplug And Replug For 30 Minutes

If your Whirlpool refrigerator is not cooling properly, one of the first troubleshooting steps you can try is performing a hard power reset. To do this, unplug the refrigerator from the wall socket and leave it unplugged for thirty minutes. This will allow any potential electrical issues to reset. After the thirty minutes have passed, plug the refrigerator back in.

Performing a hard power reset gives the refrigerator a chance to reset its internal systems and regain its proper functioning. Sometimes, electronic glitches can cause the refrigerator to stop cooling, and a power reset is the ideal solution to fix it. By disconnecting it from the power source, you are essentially giving the refrigerator a fresh start, allowing it to reboot.

Give this reset a try before moving on to further troubleshooting methods.

Factory Reset: Locate And Press Reset Buttons

If your Whirlpool refrigerator does not have a reset button, don’t worry – a factory reset can still be performed. Inside the refrigerator door, there are buttons that you can press and release to carry out a factory reset. These buttons may vary depending on the model of your refrigerator, but they are usually located near the temperature controls or the water filter indicator.

To perform a factory reset, press and release the buttons located inside the refrigerator door. This action will initiate the reset process, and the refrigerator will go through a series of self-checks and calibration. This factory reset can help resolve any issues that may be causing the refrigerator not to cool properly. Remember to consult your refrigerator’s manual for specific instructions on how to locate and press the reset buttons.

– Locate the buttons inside the refrigerator door
– Press and release the buttons
– Follow the series of self-checks and calibration
– Consult the refrigerator’s manual for specific instructions

Related Post:  Are Mini Fridges Safe in Bedrooms? Here’s What Experts Say About This Common Practice

Reactivating Freezer Or Water Filter

When troubleshooting a Whirlpool refrigerator that is not cooling, there are certain functions that can be reactivated to resolve the issue. To reactivate the freezer, press and hold the freezer switch. This will reset the freezer and allow it to resume its cooling duties.

Similarly, if you have changed the water filter or if the filter light is glowing orange, you will need to reset the refrigerator. To do this, press the Options button on the control panel, select Filter Reset, and then press the Confirm button. After performing this action, wait for a beeping sound, which indicates that the reset has been successful.

By reactivating these components, you ensure that they are operating properly and contributing to the overall cooling performance of your refrigerator. Keep in mind that sometimes, a simple reset is all that is needed to restore the cooling functionality.

Resetting Refrigerator Icon

If your Whirlpool refrigerator has a reset icon, you can use it to reset the refrigerator. Long press the refrigerator icon to trigger the reset function. This reset feature is designed to restore the refrigerator to its default settings.

By resetting the refrigerator icon, any customized settings that may be interfering with the cooling efficiency will be cleared out. This can help resolve cooling issues and restore the refrigerator to its optimal performance. Remember to consult your refrigerator’s manual for specific instructions on how to reset the icon.

Returning To Original Settings: Power Off And On

If all else fails and your Whirlpool refrigerator is still not cooling as it should, you can try returning it to its original settings. This can be done by turning off the power to the refrigerator and then plugging it back in.

To begin, power off the refrigerator by switching it off or unplugging it. Leave it powered off for a few minutes, allowing any residual electricity to discharge. After the cooling unit has been without power for a short while, plug it back in.

By power cycling the refrigerator, you are giving it a chance to reset all its internal settings and functions. This can help resolve any glitches or temporary issues that may be causing the cooling problem. After plugging the refrigerator back in, observe if it returns to its original settings and starts cooling properly again.


Check this out:


Frequently Asked Questions

What is the problem if Whirlpool fridge is not cooling?

If your Whirlpool fridge is not cooling, one possible problem could be dirty condenser coils. These coils play a crucial role in releasing heat from the appliance, and if they are covered in dirt or dust, they can’t efficiently cool the fridge. Another potential issue could be poor ventilation around the refrigerator. If the fridge is placed too close to the wall or other objects, it can restrict the airflow and prevent proper cooling. Additionally, improper installation or faulty/dirty gasket seals may result in air leakage, further hindering the cooling process.

Related Post:  How Long Can Raw Steak Stay in the Fridge? Essential Storage Guidelines for Optimal Quality and Safety

Why is my Whirlpool compressor running but not cooling?

If your Whirlpool compressor is running but not cooling, there could be a potential issue with the refrigerant levels. Insufficient levels of refrigerant can prevent the cooling process from taking place effectively. Another possible cause could be a malfunctioning condenser coil. If the condenser coil is dirty or blocked, it can impede the heat transfer process, resulting in inadequate cooling. It is important to clean the condenser coil regularly to ensure optimal performance.

Why is my Whirlpool refrigerator not cold but freezer is?

If your Whirlpool refrigerator is not cooling but the freezer is functioning properly, the issue could be with a faulty condenser coil. The condenser coil is responsible for releasing heat from the refrigerator, allowing it to cool down. If the coil is dirty or damaged, it may not be able to effectively release heat, resulting in a lack of cooling in the main compartment of the refrigerator while the freezer remains cold.

Another possible cause for this issue could be a malfunctioning thermostat. The thermostat regulates the temperature inside the refrigerator and if it is not working correctly, it may not be signaling the compressor to run, leading to inadequate cooling in the main compartment. However, since the freezer is still working fine, it indicates that the compressor itself is functioning properly.

In either case, it is recommended to contact a professional technician to diagnose and resolve the issue, as they will have the necessary tools and expertise to fix the problem and ensure the proper functioning of your Whirlpool refrigerator.

1. What are the specific steps to reset a Whirlpool refrigerator that is not cooling properly?

To reset a Whirlpool refrigerator that is not cooling properly, you can follow these specific steps. First, unplug the refrigerator from the power outlet. Wait for about 5 minutes to allow the system to reset. While waiting, make sure the refrigerator doors are closed properly. After the 5 minutes have passed, plug the refrigerator back into the power outlet. Check if the compressor or fan motor starts running. If it does, listen for the sound of the compressor running smoothly. If not, you may need to check for any power or electrical issues.

If the refrigerator still does not cool properly after the reset, try the second step. Locate the temperature control dial inside the refrigerator and set it to the coldest setting. Leave it at this setting for about 24 hours and monitor the temperature. If the refrigerator starts cooling properly, it may have been set to a warmer temperature unintentionally. If the issue still persists, it is recommended to contact Whirlpool’s customer service for further assistance or consider calling a refrigerator repair technician.

References: 1, 2, 3, 4