How to Change a Roman Tub Faucet with Ease: Step-by-Step Guide for Effortless Upgrade

How to Change a Roman Tub Faucet?

To change a Roman tub faucet, you will need to purchase matching fixtures from a home improvement center.

You should also change the cartridges inside the faucet to avoid future maintenance.

Roman tub faucets come in different installation types, materials, options, and finishes.

Some examples of Roman tub faucets include the ANZZI Nite Series 1-handle deck-mounted faucet, the Parlos 2-handle widespread waterfall faucet, and the Single Handle Deck-mount Roman Tub faucet.

Installing a Roman tub faucet requires three or four faucet holes, while deck mount faucets require two holes.

Once you have the necessary fixtures, follow the instructions provided to detach and replace the old faucet, reattach the handle, turn on the water valve, and test for leaks.

Key Points:

  • Purchase matching fixtures for the Roman tub faucet from a home improvement center.
  • Change the cartridges inside the faucet to prevent future maintenance.
  • Roman tub faucets are available in different installation types, materials, options, and finishes.
  • Examples of Roman tub faucets include the ANZZI Nite Series, Parlos 2-handle waterfall faucet, and Single Handle Deck-mount faucet.
  • Roman tub faucets require three or four faucet holes, while deck mount faucets only need two holes.
  • Follow the instructions provided to remove and replace the old faucet, reattach the handle, turn on the water valve, and check for leaks.

Did You Know?

1. The Roman Empire was one of the first civilizations to have indoor plumbing, with evidence of rudimentary water supply systems dating back to the 3rd century BCE.

2. Contrary to popular belief, the Romans did not invent the concept of faucets. The first known use of faucets can be traced back to ancient Egypt, more than a thousand years before the Roman Empire.

3. Roman tub faucets were often made of lead, as it was a widely available material at the time. However, this lead content in the water supply is believed to have contributed to the decline of the Roman Empire, as lead poisoning may have caused numerous health issues.

4. The design of Roman tub faucets was influenced by their elaborate bathing rituals. In ancient Rome, bathing was considered a social activity, and large public bathhouses often featured ornate and elaborate water fixtures, including intricate tub faucets.

5. Changing a Roman tub faucet in ancient times would have been a much more complicated task compared to modern times. Often, it required the expertise of skilled craftsmen who were trained in plumbing and metalwork. These artisans would have to disassemble and replace the entire faucet system, including the pipes and valves, using hand tools and techniques available at the time.

1. Introduction To Roman Tub Faucet Replacement

Replacing a Roman tub faucet can be a simple and rewarding project that can give a fresh look to your bathroom.

Here are a few key points to consider:

  • Roman tub fixtures are separate from each other, making them easy to update without significant plumbing work.
  • Home improvement centers offer a variety of fixture options to suit your style and preferences.
  • When changing the fixtures, it is recommended to also change the cartridges inside the faucet. This ensures smooth operation and helps avoid future maintenance issues.
Related Post:  How Does Siphoning Work and What Are Its Applications?

So, if you’re looking to update your bathroom and give it a new feel, replacing your Roman tub faucet is a great option.

Here are some additional tips to keep in mind:

  • Take note of the existing fixture’s dimensions and requirements before purchasing a new one.
  • Follow the manufacturer’s instructions carefully while installing the new faucet to ensure proper functioning.
  • Consider matching accessories to enhance the overall aesthetic of your bathroom.

Remember, investing a little time and effort into this simple project can make a big difference in rejuvenating your bathroom space. Good luck!

  • Replace Roman tub faucet for a fresh look
  • Update without significant plumbing work
  • Choose from a variety of fixture options
  • Change cartridges for smooth operation and avoid future maintenance issues.

2. Types And Designs Of Roman Tub Faucets

Roman tub faucets are a diverse range of fixtures that come in various types, designs, materials, options, and finishes to complement your bathroom decor. Three common designs to consider are freestanding faucets, deck-mounted faucets, and wall-mounted faucets, each offering a unique combination of aesthetic appeal and functionality.

Freestanding tub faucets are an excellent choice for those who want to make a bold statement in their bathroom. These faucets stand tall and elegant, often featuring a hand shower attachment, and are installed directly on the bathroom floor.

Deck-mounted tub faucets have their handles attached to the tub’s deck. To install them, you’ll need two faucet holes, resulting in a sleek and polished look.

Wall-mounted tub faucets, on the other hand, are installed directly on the bathtub wall and require hole drillings. In comparison to deck-mounted faucets, the holes for wall-mounted faucets are positioned closer together. The standard center measurement for a tub wall mount faucet is 3-3/8″.

When it comes to installation, it’s worth noting that roman tub faucets typically require three or four faucet holes, while deck mount faucets only require two. Another important distinction is that roman tub faucets cannot be mounted to the rim like deck mount faucets. Furthermore, garden tub faucets have a shorter spout length than roman tub faucets.

Remember, choosing the right type of roman tub faucet not only adds a touch of elegance to your bathroom but also enhances its functionality.

3. Considerations For Buying A Roman Tub Faucet

When buying a Roman tub faucet, there are several factors to consider.

  • Faucet Preference: Think about whether you prefer a deck-mounted faucet or a wall-mounted faucet.

  • Desired Features: Consider the features you desire, such as a hand shower attachment or a waterfall effect.

  • Budget: Establish your budget beforehand, as Roman tub faucets come in a wide price range.

  • Additional Items: Consider any valve sets or handles you may need for installation, as these can add to the overall cost.

Lastly, ensure that the replacement faucet is compatible with the existing tub and plumbing system. Roman tub faucets can be interchangeable as long as the parts fit properly, so be sure to check compatibility before making a purchase.

4. Steps To Change A Roman Tub Faucet

Changing a Roman tub faucet can be a straightforward process when following the right steps. Here is a step-by-step guide to help you through the process:

Related Post:  How to Cut CPVC Safely and Efficiently for Plumbing

1. Start by turning off the water supply valves. These are typically located beneath the sink or near the tub.

2. Remove the existing faucet handles and trim from the tub deck. This can usually be done by unscrewing the handle or trim using a wrench or screwdriver.

3. Disconnect the water supply lines from the faucet using an adjustable wrench.

4. Remove the old faucet from the tub deck by unscrewing the mounting nuts underneath.

5. Install the new faucet by following the manufacturer’s instructions. Make sure to align the faucet properly and secure it with the mounting nuts.

6. Reattach the handle and trim to the new faucet.

7. Turn on the water valves to restore the water supply.

8. Test for any leaks by running the water and checking for any signs of dripping or pooling.

By following these steps, you can successfully change a Roman tub faucet and enjoy its updated look and functionality.

  • Remember to turn off the water supply valves before starting.
  • Use an adjustable wrench to disconnect the water supply lines.
  • Carefully align the new faucet during installation.
  • Check for any leaks after turning on the water valves.
  • Enjoy your updated Roman tub faucet!

5. Additional Options And Attachments For Roman Tub Faucets

In addition to filling the tub, Roman tub faucets offer various additional options and attachments for enhanced convenience and luxury. One popular option is the addition of a shower attachment. This can be achieved by purchasing a faucet kit that includes a handheld shower attachment. This allows you to enjoy the flexibility of both a bath and a shower in one.

Depending on the design and style of the Roman tub faucet, you may also have the option to personalize it further with different handle options, finishes, or even unique water flow patterns. Explore the various options available in the market to find a Roman tub faucet that suits your specific needs and preferences.

6. Cost And Pricing For Roman Tub Faucet Installation And Replacement

The cost of installing or replacing a tub can vary depending on factors such as the type of tub, associated fixtures and hardware, and the need to hire a professional. On average, the cost of installing a new tub is around $7,100, with a price range of $1,400 to $10,000. However, if you are simply replacing a tub with existing plumbing, the cost can be as low as $200.

When it comes to Roman tub faucets, the cost varies based on factors like the brand, design, and features. Roman tub faucets available on Amazon range in price from $167 to $229. When planning your budget for a Roman tub faucet replacement, it’s important to consider the overall cost, including the faucet itself and any additional items needed for installation.

Changing a Roman tub faucet is a relatively simple task that can bring a fresh look and improved functionality to your bathroom.

When choosing a Roman tub faucet, take into account your faucet preference, desired features, budget, and compatibility with the existing tub and plumbing system. It’s recommended to follow a step-by-step guide to ensure a smooth installation process. Additionally, consider exploring additional options and attachments for added convenience.

Related Post:  How to Replace a Faucet Cartridge: Double Handle Demystified

With proper planning and execution, changing a Roman tub faucet can be a seamless upgrade that enhances your bathing experience.

  • Consider the type of tub and associated fixtures.
  • Take into account the cost of hiring a professional if needed.
  • The average cost of installing a new tub is approximately $7,100.
  • Replacing a tub with existing plumbing can cost as low as $200.
  • Roman tub faucet prices on Amazon range from $167 to $229.
  • Carefully plan your budget, including the faucet and installation materials.
  • Choose a Roman tub faucet that suits your style and preferences.
  • Ensure compatibility with the existing tub and plumbing system.
  • Follow a step-by-step guide for a smooth installation process.
  • Explore additional options and attachments for added convenience.

Check this out:


Frequently Asked Questions

How do I replace my bathtub faucet?

To replace your bathtub faucet, start by turning off the water supply to your home. This is an important step to prevent any water damage or flooding during the replacement process. Once the water is off, lay a towel or cloth at the bottom of the tub to catch any dropped parts or water.

Next, remove the handle index to access the stem. Unscrew the stem and remove the spout of the faucet. Take note of the parts that need to be replaced and purchase the new ones. Then, screw in the new stem and install the new handles. Finally, turn the water supply back on and test the faucet to ensure it is working properly. With these steps, you should be able to replace your bathtub faucet and enjoy a functioning fixture in no time.

Can I replace my Roman tub trim?

Yes, you can replace your Roman tub trim if the valve body has threaded all the way down the inside and the spout meets the necessary height requirements. By removing and replacing the assembly pieces with the parts from the Moen Service Kit 106378, the valve can be modified to accept the new trim design. This allows for a seamless upgrade to your Roman tub, giving it a fresh and updated look without the need for extensive plumbing changes.

Can I use regular faucet on Roman tub?

No, it is not recommended to use a regular faucet on a Roman tub. While you can replace a Roman tub faucet with a similar and compatible model, regular household faucets are not designed to provide the same level of flow rate that a tub faucet does. The tub faucet is specifically designed to provide a more effective flow rate for filling the bathtub efficiently. Therefore, using a regular faucet would not be suitable for a Roman tub.

What is the bathtub faucet called?

The bathtub faucet is commonly referred to as a tub spout. This output device allows water to flow into the tub, with the flow being controlled by a valve. Another type of faucet commonly found in bathtubs is the two-handle faucet, which features separate handles to control the temperature of the hot and cold water.

References: 1, 2, 3, 4