How to Clean Maytag Washer Filter: The Ultimate Guide

How to Clean Maytag Washer Filter?

To clean the Maytag washer filter, follow these steps:

1. Turn off the washer and unplug it for safety.

2. Locate the filter, which is typically found at the bottom of the machine.

3. Remove the filter by twisting it counterclockwise or pulling it out, depending on the model.

4. Remove any lint or debris trapped in the filter by hand.

5. Rinse the filter thoroughly under running water to remove any remaining dirt.

6. Replace the drain pump filter if applicable, ensuring it is secured properly.

7. Finally, secure the dispenser drawer and make sure it is closed properly.

By following these steps, you will effectively clean the Maytag washer filter.

Key Points:

  • Turn off and unplug the Maytag washer for safety.
  • Locate the filter, usually located at the bottom of the machine.
  • Remove the filter by twisting it counterclockwise or pulling it out.
  • Remove any lint or debris from the filter by hand.
  • Rinse the filter thoroughly under running water.
  • Replace the drain pump filter if necessary and ensure it is secured properly.

Did You Know?

1. The Maytag company, known for its durable and reliable appliances, was founded in 1893 by Frederick Louis Maytag.
2. Did you know that Maytag originally started as a farm implement manufacturer before transitioning to producing washing machines in 1907?
3. The Maytag Washer Filter, also known as the lint filter, is located inside the washing machine drum. It helps to catch lint, cloth fibers, and other small particles during the wash cycle.
4. Cleaning the Maytag Washer Filter is essential for maintaining optimal performance. It is recommended to clean it at least once a month to prevent build-up and ensure efficient water drainage.
5. One little-known fact is that neglecting to clean the Maytag Washer Filter regularly can lead to issues such as poor washing results, longer cycle times, and even potential damage to the washing machine over time. So, it’s crucial to pay attention to this often-overlooked maintenance task!

Turn Off And Unplug The Washer

Cleaning the filter in your Maytag washer is an essential maintenance task that ensures optimal performance of your machine. Before starting the cleaning process, it is crucial to:

  1. Turn off the washer.
  2. Unplug it from the power source.

These steps are vital to prevent any electric shock or accidents that may occur during the cleaning process. Safety should always be the top priority whenever working with any electrical appliances.

Locate The Filter

Once the washer is turned off and unplugged, the next step is to locate the filter. The filter is responsible for trapping lint and debris that may accumulate during the wash cycles. It is usually located at the bottom front of the appliance. Carefully examine the front of the washer and look for a small door or cover. This door or cover grants access to the filter.

  • Turn off and unplug the washer before proceeding.
  • Locate the filter at the bottom front of the appliance.
  • Look for a small door or cover to access the filter.

Remember to always refer to the manufacturer’s instructions for specific guidance on locating and cleaning the filter.

Remove The Filter

After identifying the location of the filter, gently open the small door or cover to reveal the filter. Depending on the model of your Maytag washer, the filter may be secured with screws or clips. Use the appropriate tools, such as a screwdriver or pliers, to loosen and remove any fasteners holding the filter in place.

Once the screws or clips are removed, carefully pull out the filter. Be cautious as there may be residual water trapped inside the filter. Have a towel or a basin nearby to catch any water that may spill during the removal process. Taking these precautions will help you maintain a clean and dry working area.

  • Gently open the small door or cover
  • Use appropriate tools to loosen and remove fasteners
  • Carefully pull out the filter
  • Have a towel or basin nearby to catch any spilled water

Remove Lint And Debris By Hand

With the filter in hand, it’s time to remove the accumulated lint and debris. Gently brush off any visible lint using your fingers or a soft-bristle brush. Take your time to ensure all the trapped particles are removed. If necessary, use a damp cloth to wipe away any stubborn dirt or grime. Thoroughly inspect the filter to ensure no debris is left behind. Cleaning the filter regularly will prevent clogs and promote efficient water drainage during each wash cycle.

  • Remember to be gentle when brushing off the lint.
  • Use a soft-bristle brush to prevent damaging the filter.
  • Take your time to ensure thorough cleaning.
  • Wipe away stubborn dirt or grime with a damp cloth.

Keeping the filter clean is essential for preventing clogs and ensuring efficient water drainage.

Rinse The Filter Under Running Water

After manually removing the lint and debris, it’s important to give the filter a good rinse. Hold the filter under running water, preferably in a sink or with a hose outside. Allow the water to flow through the filter, washing away any remaining particles. Use your fingers or a soft brush to gently scrub the filter, ensuring that every part is thoroughly cleaned. Pay extra attention to the tiny holes or slits, as these can easily become clogged and affect the washer’s performance.

  • Rinse the filter under running water
  • Use fingers or a soft brush to scrub the filter
  • Pay extra attention to tiny holes or slits

“Properly cleaning the filter is essential for ensuring optimal performance of the washer.”

Replace The Drain Pump Filter

Once the filter is completely clean, reinstall it into the washer. Carefully insert the filter back into its original position, making sure it fits securely. If there were any screws or clips used to hold the filter in place, reattach them. Ensure all fasteners are tightened appropriately to prevent any leaks or loose connections.

  • Insert the filter back into its original position
  • Reattach any screws or clips used to hold the filter in place
  • Tighten all fasteners properly to prevent leaks or loose connections
Related Post:  Why Is My Washer Not Filling With Water? Troubleshooting Guide for Effective Laundry Day

Secure The Dispenser Drawer

The final step in the cleaning process is to secure the dispenser drawer. If you had removed the dispenser drawer to access the filter, make sure it is properly fitted back into its slot. Push the drawer in firmly until it locks into place. Double-check to ensure it is secure and won’t accidentally come loose during future wash cycles.

  • By following these step-by-step instructions, you can effectively clean the filter in your Maytag washer, promoting its longevity and efficient performance.
  • Remember to regularly clean the filter to avoid any clogs and maintain the overall cleanliness of your machine.
  • Keeping your Maytag washer filter clean will allow your laundry to come out fresh and clean every time.

Check this out:

Frequently Asked Questions

How do you clean the filter on a Maytag top load washer?

To clean the filter on a Maytag top load washer, start by preparing a shallow container to collect any water that may come out of the inlet hose connected to the drain pump. Following the instructions in your product manual, carefully remove the filter. Begin by removing any large clumps of lint or debris by hand. Rinse the filter thoroughly with warm water to ensure it is clean, and then reinstall it according to the instructions provided in the manual. This process will help maintain the efficiency and longevity of your Maytag top load washer.

Where is the filter in my Maytag washing machine?

The filter in your Maytag washing machine is conveniently located behind a dispenser drawer on the right side of the washer’s front base. This strategic placement ensures that it provides adequate protection for the drain pump, which is located right next to it. With this design, your Maytag washer filter effectively enhances the performance and longevity of your washing machine, allowing for efficient and trouble-free operation.

Related Post:  Can You Use Non HE Detergent in Your HE Washer? Maximizing Efficiency and Avoiding Damage

Does a Maytag washer have a filter to clean?

Yes, a Maytag washer does have a filter to clean. To locate it, you can refer to the owner’s manual for your specific Maytag washer model. The manual will provide detailed instructions on how to access and clean the filter, which is typically located at the bottom of the machine behind a small access panel. Regularly cleaning the filter helps to maintain the efficiency and performance of your Maytag washer.

How often should the Maytag washer filter be cleaned?

The Maytag washer filter should be cleaned regularly to ensure optimal performance and longevity of the appliance. It is recommended to clean the filter every 2-3 months or whenever it becomes visibly dirty or clogged. Regular cleaning will help prevent buildup of dirt, lint, and debris, which can affect the washer’s efficiency and potentially cause issues with draining and pumping water. By adhering to a regular cleaning schedule, you can maintain the quality of your Maytag washer and promote its long-term functionality.

References: 1, 2, 3, 4