How to Disassemble a Kitchenaid Stand Mixer: StepbyStep

How to Disassemble a Kitchenaid Stand Mixer?

To disassemble a Kitchenaid Stand Mixer, follow these steps:
1.

Unplug the mixer and turn off the speed control.

Slide the locking lever to unlock the position and lift the motor head.

Slide the locking lever to lock the position to keep the motor head up.

Optional: Remove the pouring shield by lifting it clear of the bowl rim and pulling it away from the mixer.

Turn the speed control to “0”, unplug the mixer, and tilt the motor head back.

Press the accessory upward, then turn it clockwise to release it from the beater shaft.

Turn the bowl counterclockwise to release it from the bowl clamping plate.

Note: Pouring shields and accessories may not be applicable to all models.

If these instructions don’t work, contact Kitchenaid or visit their service locator.

Key Points:

Unplug the mixer and turn off the speed control
Slide the locking lever to unlock the position and lift the motor head
Slide the locking lever to lock the position to keep the motor head up

Optional: Remove the pouring shield by lifting it clear of the bowl rim and pulling it away from the mixer
Turn the speed control to “0”, unplug the mixer, and tilt the motor head back
Press the accessory upward, then turn it clockwise to release it from the beater shaft

Did You Know?

1. The Kitchenaid Stand Mixer was invented by Herbert Johnston in 1919, who was inspired by the industrial mixers used in bakeries.

2. The iconic design of the Kitchenaid Stand Mixer, with its smooth curves and bright colors, was created by Egmont Arens, a renowned American industrial designer.

3. The “planetary action” of the Kitchenaid Stand Mixer is one of its key features. This means that the mixer’s attachments rotate around the bowl in one direction while also spinning on their own axis, ensuring thorough and consistent mixing.

4. The Kitchenaid Stand Mixer has become a favorite among professional chefs. In fact, it has been featured in episodes of popular cooking shows such as “MasterChef” and “The Great British Bake Off.”

5. Despite being a heavyweight in the kitchen, the Kitchenaid Stand Mixer is surprisingly gentle with delicate ingredients. The lowest speed setting is slow enough to fold in fragile ingredients like whipped egg whites without deflating them.

Unplug And Prepare The Mixer

When disassembling a KitchenAid Stand Mixer, follow these important steps:

Safety first: Make sure the mixer is unplugged and the speed control is turned off to prevent accidental starts or injuries.
Power down completely: Ensure that the mixer is completely powered down and set the speed control to the lowest setting, which is “0”.

Remember to always prioritize safety when disassembling the mixer.

Lift And Secure The Motor Head

Now that the mixer is prepared, you can proceed to lift and secure the motor head.

Slide the locking lever, usually located on the right side of the mixer, to the unlock position.

With one hand, hold the motor head while lifting it from its current position.
Once the motor head is lifted, slide the locking lever back to the lock position.
This will keep the motor head securely in place, preventing any accidental movements.

Tip: Make sure to follow these steps carefully to avoid any damage to the mixer or injury.

Remove Optional Accessories

Some Kitchenaid Stand Mixer models come with optional accessories like a pouring shield. If your mixer includes these extra attachments, you can remove them at this stage. Simply lift the front of the pouring shield clear of the rim of the mixing bowl and gently pull it away from the mixer. It should easily detach, allowing you to continue with the disassembly process. Keep in mind that not all models will have these optional accessories, so this step may not be applicable to your specific mixer.

Lift the front of the pouring shield clear of the rim of the mixing bowl.
Gently pull the pouring shield away from the mixer.

It should easily detach, allowing you to continue with the disassembly process.

Note: Not all models will have these optional accessories, so this step may not be applicable to your specific mixer.

Tilt The Motor Head Back

Now it’s time to tilt the motor head back for easier access to the inner workings of the mixer. Turn the speed control back to the lowest setting (“0”) and ensure that the mixer is still unplugged. With one hand holding the motor head, use your other hand to tilt it back, creating a comfortable angle for disassembly. Take your time and ensure that the motor head is securely locked in place before proceeding.

Turn the speed control to “0”

Unplug the mixer
Hold the motor head with one hand
Tilt the motor head back with your other hand

Ensure the motor head is securely locked in place

“Take your time and ensure that the motor head is securely locked in place before proceeding.”

Release Accessories From Beater Shaft

To disassemble the attachments connected to the beater shaft, press the accessory upward as far as possible for better control and leverage. Then, turn the accessory clockwise to release it from the beater shaft. This should easily detach it, allowing you to proceed to the next step.

Release Bowl From Bowl Clamping Plate

To release the mixing bowl from the bowl clamping plate, gently turn the bowl counterclockwise. This action will unlock the bowl from its current position, allowing you to remove it from the mixer. Take care not to apply excessive force while turning the bowl, as this may cause damage to the clamping plate or the bowl itself. With a steady hand, continue to turn the bowl until it is completely released.

Remember to prioritize your safety by unplugging the mixer and ensuring that the speed control is turned off before beginning. Here are the step-by-step instructions to disassemble a KitchenAid Stand Mixer:

Lift and secure the motor head
Remove any optional accessories

Tilt the motor head back
Release the accessories from the beater shaft
Finally, release the bowl from the bowl clamping plate.

By following these instructions, you will be able to disassemble your KitchenAid Stand Mixer with ease.

Frequently Asked Questions

Is it worth repairing a KitchenAid mixer?

When considering whether to repair a KitchenAid mixer, several factors come into play. Firstly, the age of the mixer is a crucial aspect. If the mixer is relatively new and has served you well, it may be worth repairing. Secondly, the cost of repair plays a significant role. If the repair cost is reasonable and does not outweigh the price of a new mixer, opting for repair can be a viable option. Additionally, if the mixer continues to fulfill your needs adequately, repairing it can extend its lifespan and save you the hassle of adjusting to a new model. However, if the mixer is old, the repair cost is disproportionately high, or acquiring replacement parts is challenging, it may be a more practical decision to invest in a new KitchenAid mixer model that suits your requirements better.

1. What are the recommended steps to safely disassemble a Kitchenaid Stand Mixer for cleaning or repair?

To safely disassemble a Kitchenaid Stand Mixer for cleaning or repair, it is advisable to follow these recommended steps:

1. Unplug the mixer: Before starting any work, ensure that the mixer is completely unplugged from the power source to avoid any electric shock or accidents.

2. Remove attachments and bowl: Take off any attachments such as the dough hook, flat beater, or wire whip from the mixer head. Next, lift and remove the mixing bowl from the base of the mixer.

3. Access the attachment hub: To clean or repair the attachment hub, twist the attachment mounting plate counterclockwise and remove it from the mixer head. This will expose the hub gear and provide access for maintenance.

4. Disassemble other parts (if necessary): If further disassembly is required, refer to the user manual specific to your Kitchenaid Stand Mixer model. It will provide detailed instructions on removing components such as the planetary assembly or motor housing.

Remember, it is always recommended to consult your product manual for model-specific instructions, as the disassembly process may vary slightly depending on the mixer variant you own. If you are uncertain or uncomfortable with the disassembly process, it is best to seek professional assistance or contact the manufacturer for guidance.

2. Are there any specific tools or equipment required to disassemble a Kitchenaid Stand Mixer, and if so, what are they?

Yes, there are specific tools required to disassemble a KitchenAid Stand Mixer. The most common tool needed is a screwdriver, typically a Phillips or flathead depending on the model. Other tools that may be required include an Allen wrench or torque wrench, depending on the specific mixer. It is also recommended to have a pair of pliers, especially for models with heavily tightened screws. Additionally, some disassembly may require a small hammer or mallet to loosen stuck parts. It is important to refer to the mixer’s manual or online resources for the specific tools required for disassembly to ensure a safe and proper process.

3. Are there any specific precautions or guidelines to follow when disassembling a Kitchenaid Stand Mixer to avoid damaging any delicate components?

When disassembling a Kitchenaid Stand Mixer, it is important to follow some precautions and guidelines to avoid damaging any delicate components. Firstly, make sure to unplug the mixer from the power source to prevent any electrical accidents. Secondly, handle the parts with care and avoid using excessive force during the disassembly process. It is helpful to refer to the user manual or online resources for guidance on how to correctly disassemble the mixer. Additionally, keep track of the screws and small parts by placing them in a designated container or using a magnetic tray to prevent loss. These precautions will help ensure the delicate components of the Kitchenaid Stand Mixer are not damaged during disassembly.