How to Get All the Water Out of a Keurig: Quick Tips for Optimal Maintenance
How to Get All the Water Out of a Keurig?
To get all the water out of a Keurig coffee machine, there are two methods you can follow.
The simple method involves removing the water reservoir, brewing a serving to trick the machine into thinking it’s not empty, and then discarding the water.
The more complex method involves removing screws, detaching tubes, and using tools like a screwdriver and pliers to detach various components.
However, attempting the complex method may void any warranties on the Keurig.
For a Keurig 1.0 brewer, you need to detach silicone tubes connected to the metal water filter attachments, invert the brewer to allow water to flow out, and ensure proper air flow for faster draining.
The process takes about 10-15 minutes.
For a Keurig 2.0 brewer, additional steps are required such as removing the water intake assembly, detaching the filter and pump assembly, and emptying out the filter.
The process takes longer than draining a Keurig 1.0 brewer.
Key Points:
- Two methods for removing all water from a Keurig coffee machine
- Simple method involves removing water reservoir, brewing a serving, and discarding water
- Complex method involves removing screws, detaching tubes, and using tools like screwdriver and pliers
- Attempting complex method may void warranties on Keurig
- Keurig 1.0 brewer requires detaching silicone tubes, inverting brewer, and ensuring air flow
- Keurig 2.0 brewer requires additional steps such as removing water intake assembly and detaching filter and pump assembly
Did You Know?
1. The inventor of the Keurig, John Sylvan, actually doesn’t use the machine, preferring to brew his coffee using a traditional drip coffee maker.
2. NASA astronauts aboard the International Space Station (ISS) use a modified version of the Keurig machine to brew coffee in microgravity conditions. The coffee capsules are designed to prevent any spills or leaks in zero gravity.
3. In addition to coffee, Keurig machines can also be used to make other hot beverages such as hot chocolate, tea, and even soup, using compatible K-Cup pods.
4. To efficiently remove all the water from a Keurig, you can run a brew cycle without using a K-Cup pod. This will help flush out any remaining water in the internal system.
5. Keurig’s water reservoir should be emptied and cleaned about once every three months to prevent any buildup of mineral deposits or bacteria that could affect the taste of your coffee.
Introduction And Importance Of Draining Water From A Keurig Coffee Machine
Keeping a Keurig coffee machine in proper working condition requires regular maintenance, including draining the water from its internal tanks. Keurig machines, like most coffee makers, have an external water tank to hold the water used for brewing. However, they also have an internal water reservoir that can retain water if not properly drained.
Leaving water in the internal tanks can lead to the growth of mold and bacteria, which can affect the taste of your coffee and pose health risks. In addition, if the machine is stored in a cold environment, the water can freeze and cause damage.
Therefore, it is crucial to know how to effectively drain all the water from your Keurig.
Draining A Keurig Mini, Mini Plus, Or K15 Model: Simple Method
If you own a Keurig Mini, Mini Plus, or K15 model, you are in luck as these models can be completely drained without voiding the warranty. The first step is to turn off the machine and make sure it is unplugged for safety. Place a mug under the spout to catch any water that may be released during the draining process. Lift the brewer handle as if you were going to insert a K-cup, and then press the brew button. This will start the brewing process without actually brewing any coffee. The machine will think it is brewing, so water from the internal tank will flow out into the mug. Once all the water has been drained, your Keurig Mini, Mini Plus, or K15 model is ready for storage.
Draining A Keurig Mini, Mini Plus, Or K15 Model: Complex Method
To thoroughly drain the Keurig Mini, Mini Plus, or K15 models, you can follow a slightly complex method:
- Turn off and unplug the machine.
- Remove the water reservoir and ensure there is no remaining water.
- Take out the K-cup holder and drip tray. This will expose the internal components.
-
Carefully remove the exterior case wrapping to access the internal water tank.
Note: Proceeding with the complex method may void any warranties.
-
Unclip the water intake assembly located inside the water tank.
- Remove the internal filter. Find and remove a small screw near the base of the motherboard to free the filter.
- Detach the filter from the pump assembly by removing the screw holding the water tank and pump assembly together.
-
Gently detach the tubes on the top of the water tank and leading from the pump assembly to drain the water from them.
Exercise caution to avoid damaging any components during this step.
-
Optionally, use a syringe to pump out any remaining water in the pump assembly.
-
Reassemble the machine by following the steps in reverse order.
-
Use a flat-head screwdriver and needle-nose pliers.
- Optional items: small zip ties and a plastic straw.
Remember: This complex method may void your Keurig’s warranties. If you decide to proceed, follow the steps carefully.
Draining A Keurig 1.0 Brewer: Step-By-Step Guide
If you own a Keurig 1.0 brewer, the process of draining the water is slightly different. Here are the steps to follow:
-
Start by detaching the silicone tubes connected to the metal water filter attachments. You can do this by either wiggling off any zip ties using needle-nose pliers or carefully snipping them off.
-
Once the tubes are detached, invert the brewer to allow the water to flow out of the L-shaped opening. It is important to note that proper air flow is necessary for faster draining.
-
To improve air flow, you can use a thin straw over the other opening with a detached tube attached to it.
-
Let the water drain completely from the brewer.
-
After the water has been drained, reattach the silicone tubes using either the original zip ties or new ones if they were snipped off.
-
Finally, reassemble the brewer by attaching the top and securing it with screws.
-
Detach the silicone tubes connected to the metal water filter attachments.
- Invert the brewer to allow water to flow out of the L-shaped opening.
- Improve air flow by using a thin straw over the other opening.
- Let the water drain completely.
- Reattach the silicone tubes.
- Reassemble the brewer by attaching the top and securing it with screws.
Remember to ensure proper air flow for faster draining.
Draining A Keurig 2.0 Brewer: Detailed Instructions
For owners of a Keurig 2.0 brewer, the process of draining the water is more involved. You will need a Phillips-head screwdriver, needle-nose pliers, and a plastic syringe.
Follow these detailed instructions to drain all the water from your Keurig 2.0 brewer:
- Turn off and unplug the machine.
- Remove any remaining water from the reservoir.
- Detach the chrome ring located behind the pod assembly. This will expose the screws that hold the top part of the machine in place.
- Remove these screws using the Phillips-head screwdriver.
- Slide off the top part of the machine to gain access to the internal components.
- To drain the water from certain parts of the brewer, you may need to detach the motherboard and internal filter. Follow the instructions provided by Keurig to safely remove these components.
- Once removed, you can access the water tank assembly.
- Detach the filter and pump assembly from the tank and empty out any water in the filter.
- Detach the tubes on the top of the water tank and leading from the pump assembly to drain the remaining water.
- To further drain the Keurig 2.0 brewer, you will need to remove the chrome ring behind the pod assembly.
- Unscrew the bottom of the brewer and detach the front panel. These steps will provide access to the screws on the top of the water reservoir side.
- Remove these screws to detach the top of the machine.
- Once the top is removed, you can proceed to drain any remaining water.
Note: Draining the water from your Keurig coffee machine is important for its proper maintenance. Follow the step-by-step instructions provided and exercise caution when handling the internal components of the machine.
By draining the water from your Keurig, you can ensure the longevity of your coffee maker and enjoy consistently great-tasting coffee.
- Ensure Keurig machine is turned off and unplugged.
- Remove any remaining water from the reservoir.
- Detach chrome ring to expose screws holding the top part in place.
- Slide off the top part to access internal components.
- Safely remove motherboard and internal filter as per Keurig instructions.
- Access water tank assembly.
- Detach filter and pump assembly from the tank and empty water in filter.
- Detach tubes on top of water tank and leading from pump assembly to drain remaining water.
- Remove chrome ring behind the pod assembly to further drain.
- Unscrew the bottom of the brewer and detach front panel.
- Remove screws on top of water reservoir side to detach top of the machine.
- Drain any remaining water.
Frequently Asked Questions
Why is the water not all coming out of my Keurig?
One possible reason why the water is not coming out of your Keurig could be a clogged water pump caused by accumulated debris and scaling. This buildup can hinder the smooth flow of water, leading to the issue you are experiencing. To address this problem, you can start by removing the Keurig water reservoir, emptying it out, and refilling it partially. By doing so, you can help improve the water flow and potentially resolve the issue.
How do you use the drain button on a Keurig?
To use the drain button on a Keurig, first, locate the Brew/Drain selector at the back of the brewer and turn it to the “DRAIN” position. Once in this position, the flashing green Drain light will indicate that you can initiate the draining process. To begin, simply press and hold the Drain button, allowing the brewer to efficiently drain.
How do you remove the water reservoir from a Keurig single serve?
To remove the water reservoir from a Keurig single serve, begin by placing a mug on the drip tray. Next, remove the water reservoir lid and lift the reservoir straight up to detach it from the machine. Afterward, rinse the reservoir with fresh water and fill it up to the MAX FILL line. Finally, carefully put the water reservoir back in place, ensuring that the lock tabs securely engage with the brewer.
How do you tell if your Keurig is clogged?
If your Keurig is clogged, you’ll typically notice a decrease in the amount of coffee being brewed. One indication is when the machine only dispenses a small portion of the usual cup size. In such cases, it’s worth checking the removable parts for any blockages caused by coffee grounds. By cleaning these parts thoroughly with dish soap and hot water, and then using a paperclip or plastic straw to break up any remaining clogs, you can potentially restore your Keurig to its normal functioning.