How to Reset a GE Washer: Troubleshooting Guide

How to Reset a GE Washer?

To reset a GE washer, start by unplugging it from the power outlet.

Wait for a minute before plugging it back in.

Then, locate the “Start” or “Pause/Cancel” button on the control panel and press and hold it for about 3 to 5 seconds until the washer resets.

Finally, wait for the reset process to complete and check if the default settings are displayed on the control panel, indicating a successful reset.

Key Points:

  • Unplug the GE washer from the power outlet
  • Wait for a minute
  • Plug the washer back in
  • Press and hold the “Start” or “Pause/Cancel” button for 3 to 5 seconds
  • Wait for the reset process to complete
  • Check the control panel to see if default settings are displayed for successful reset

Did You Know?

1. Before the invention of electric washers, the first washing machines consisted of a manual wooden frame mounted with a handle to agitate and clean the clothes.

2. In the early 19th century, washers relied on a traditional method called “pounding” clothes, which involved repeatedly beating them against rocks or wooden planks to remove dirt and stains.

3. The first electric-powered washing machine was introduced by American inventor Alva J. Fisher in 1908, revolutionizing the laundry process and making it more efficient.

4. Some early versions of electric washers featured a built-in “wringer” mechanism, which squeezed out excess water from clothes before they were hung to dry. This was a manual operation that required careful feeding of the garments between the rollers.

5. One of the key components in modern washers is the agitator, which is a rod or spindle in the center of the tub that moves clothes around and helps to clean them. However, not all washing machines use agitators; some newer models utilize alternative technologies such as high-efficiency impellers or pulsators.

Unplugging The GE Washer From Power Outlet

When it comes to resetting your GE washer, the first step is simple yet crucial. You need to unplug the washer from the power outlet. This ensures that the machine is completely disconnected from its power source and allows the internal system to reset. By disconnecting the power, any temporary glitches or malfunctions can be cleared, giving you a fresh start to resolve any issues you may be experiencing.

It is important to note that you should never attempt to reset your GE washer while it is still connected to the power supply. This could potentially lead to electrical shock or other hazards. Therefore, always make sure to unplug the washer as the initial step in the reset process.

After unplugging the GE washer, take a moment to examine the power cord and outlet for any signs of damage. If you notice any frayed wires or loose connections, it is recommended to address these issues before proceeding with the reset. Ensuring a safe and secure power supply is crucial for the proper functioning of your washer.

Related Post:  How to Find Lost Items in Washing Machine: Simple Solutions for Retrieval Success

Waiting For One Minute To Allow The Washer To Reset

After disconnecting the GE washer from the power outlet, it is important to wait for approximately one minute. This waiting period allows the washer’s internal system to fully reset before being powered back on. During this time, any residual power or information within the machine dissipates, ensuring a clean slate for troubleshooting and resolving any problems.

While it may seem like a short period, waiting for one minute can make a significant difference in the effectiveness of the reset. This break gives the washer enough time to eliminate any lingering information or temporary errors, increasing the chances of a successful reset and resolving any issues you may be facing.

Here are some additional steps to consider during this waiting period:

  • Evaluate the condition of the washer and its surroundings: Check for any visible signs of wear or malfunction that may have contributed to the need for a reset.
  • Cleaning the exterior of the washer: Use this time to clean the outside of the washer, helping to maintain its overall performance and appearance.

Remember, by following these steps and allowing the washer to fully reset, you are giving yourself the best opportunity to troubleshoot and resolve any problems you may be experiencing.

Plugging The Washer Back Into The Power Outlet

After patiently allowing the GE washer to reset for one minute, the next step is to reconnect its power supply. Begin by firmly plugging the washer back into the power outlet. Ensure that the connection is secure and there are no loose or dangling wires. A proper power supply is essential for the efficient and safe operation of your washer.

When plugging the washer back in, it is recommended to avoid using extension cords or power surges. These accessories can interfere with the electrical flow and potentially cause damage to the machine. Plugging the washer directly into a dedicated outlet minimizes the risk of electrical problems and maximizes the reliability of the reset process.

Once the GE washer is securely plugged into the power outlet, you are ready to move on to the next step in the reset process. Remember to handle the power cord with care, avoiding any sharp objects or extreme bending that could compromise its integrity and safety.

  • Allow the washer to reset for one minute
  • Firmly plug the washer back into the power outlet
  • Ensure secure connection with no loose wires
  • Avoid using extension cords or power surges
  • Plug the washer directly into a dedicated outlet
  • Handle the power cord with care.

Pressing The “Start” Or “Pause/Cancel” Button On The Control Panel

With the washer properly connected to the power outlet, it is time to interact with the control panel to initiate the reset process. Locate the “Start” or “Pause/Cancel” button on the washer’s control panel, which may vary depending on the model. Identify the correct button before proceeding to ensure a successful reset.

Related Post:  What Does F20 Mean on a Washer? Troubleshooting Tips & Solutions to Fixing the Error

When you have identified the appropriate button, press and hold it down for about 3 to 5 seconds. This continuous pressure triggers the reset mechanism within the washer’s system. During this time, the machine recalibrates its settings and flushes out any temporary errors or issues that may have caused malfunctions or disturbances in performance.

As you hold down the button, you may notice various indicators on the control panel, such as lights or digital displays, responding to your actions. These visual cues signify that the reset process is underway, reassuring you that the GE washer is in the process of resolving any internal issues.

  • Make sure the washer is properly connected to the power outlet.
  • Locate the “Start” or “Pause/Cancel” button on the washer’s control panel.
  • Identify the correct button before proceeding.
  • Press and hold the button for about 3 to 5 seconds.

Holding The Button Down For 3-5 Seconds For The Washer To Reset

While continuing to exert pressure on the “Start” or “Pause/Cancel” button, it is crucial to maintain the hold for approximately 3 to 5 seconds. This timeframe allows the GE washer enough time to complete the reset process successfully. Releasing the button prematurely may interrupt the reset sequence and could potentially affect the effectiveness of the process.

As you maintain the button press, you may notice various signs of the reset process taking place. The control panel might display different patterns of lights, such as blinking or changing colors, indicating the progress of the reset. Additionally, you might hear audible signals or clicks stemming from the internal mechanism, further confirming the reset process is in motion.

It is essential to remain patient and attentive during this phase, as interrupting or releasing the button too soon may require starting the reset process from the beginning. By diligently following the recommended timeframe, you increase the likelihood of a successful reset.

  • Maintain pressure on the “Start” or “Pause/Cancel” button for 3 to 5 seconds.
  • Observe the control panel for different light patterns.
  • Listen for audible signals or clicks.
  • Stay patient and attentive to avoid interrupting the reset process.

Verifying The Successful Reset By Checking The Default Settings

To reset your GE washer, follow these steps:

  1. Hold down the “Start” or “Pause/Cancel” button for the recommended duration.
  2. Release the button and wait for a few moments.
  3. The control panel should display the default settings pre-programmed by the manufacturer, which confirms that the reset process is complete.

To ensure the successful reset, check the control panel for any remnants of previous settings or customizations. Make sure that all settings have returned to their default values. By doing so, you can be confident that the washer is ready to function normally without any lingering issues or errors.

Related Post:  How to Remove Washing Machine Drum with Ease

To further verify the reset, run a test cycle using the default settings. This will allow you to confirm that the washer is operating correctly after the reset and ensure that any problems you encountered have been resolved. Observe the washer throughout the test cycle to identify any lingering issues that may require additional troubleshooting or professional assistance.

  • Unplug the washer from the power outlet and wait for a full minute.
  • Reconnect the power and press and hold the appropriate button.
  • Release the button after a few seconds.
  • Check the default settings to confirm the reset.

By following these steps, you can successfully reset and troubleshoot any issues with your GE washer.


Check this out:


Frequently Asked Questions

Is there a reset button on my GE washer?

Yes, there is a reset option for your GE washer. To reset the electronic controls, you can either turn off the circuit breaker or fuse to the washer, or unplug it for a period of 2 minutes. If your washer has a timer control knob, you can also reset it by turning the knob to any position other than the final spin for the interrupted cycle, and then restoring power. This will allow you to start fresh and resolve any issues you may be experiencing with your washer.

How do I reset my GE washer WiFi?

To reset your GE washer WiFi, follow these steps: First, press and hold the “Temp” button, or if available, the “WiFi” button, immediately after turning on the power. Keep holding the button until the washer powers off and you see the WiFi indicator come on. This will initiate the reset process and restore the washer’s WiFi settings.

Why won t my GE washer not start?

If your GE washer is not starting, the thermal fuse may be the culprit. The thermal fuse is designed to blow and cut off power to prevent overheating and damage to other components. To get your washer up and running again, the thermal fuse will need to be replaced. However, it is essential to investigate the cause of overheating before simply replacing the fuse to avoid a repeat occurrence.

How do I reset my washer after error code?

To reset your washer after an error code, begin by turning off the machine at the powerpoint and waiting for a minute. After the minute has passed, turn the machine back on. If this does not resolve the issue, you can attempt a Master Reset. This resets all the onboard components and is a common solution used by appliance technicians. To perform a Master Reset, open and close the door of the washing machine six times within 12 seconds. This should help reset the system and clear any error codes.

References: 1, 2, 3, 4