How to Reset Amana Washer: Quick Guide for Troubleshooting
How to Reset Amana Washer?
To reset an Amana washer, start by turning off the washer and unplugging it from the electrical outlet.
Wait for at least 30 seconds to 1 minute before plugging it back in.
Then, press and hold the “Spin Speed” and “Soil Level” buttons simultaneously for at least 6 seconds, and release.
If this doesn’t work, another option is to unplug the machine and let it rest for at least 2 minutes.
Open and close the washer lid 6 times within a 12-second period, ensuring the lid makes contact with the lid switch each time.
Additionally, if the lid lock is inhibiting the washer from starting, unplug the machine, wait for 60 seconds, restore power, and hold the ‘End Cycle’ or ‘Cycle Signal’ button for 20 seconds or until a beep is heard.
Remember to check for any paused cycles or unbalanced loads that may be causing the issue.
Key Points:
- Turn off and unplug the Amana washer.
- Wait for at least 30 seconds to 1 minute before plugging it back in.
- Press and hold the “Spin Speed” and “Soil Level” buttons simultaneously for at least 6 seconds.
- Alternatively, unplug the machine and let it rest for at least 2 minutes.
- Open and close the washer lid 6 times within a 12-second period, ensuring contact with the lid switch.
- If the lid lock is inhibiting the washer from starting, unplug the machine, wait for 60 seconds, restore power, and hold the ‘End Cycle’ or ‘Cycle Signal’ button for 20 seconds or until a beep is heard.
Did You Know?
1. The Amana Corporation, which started as a refrigeration company in 1934, actually began as a small subsidiary of the Amana Society, a religious communal group known as the Amana Colonies.
2. Amana washer models typically offer a “Clean Washer” cycle, which is designed to remove residue, dirt, and mildew from the machine’s interior. It is recommended to run this cycle at least once a month to effectively maintain the washer’s performance.
3. The Amana washer models often come equipped with a unique feature called “Delay Start.” This allows users to load the machine and set a specific time for the wash cycle to begin, enabling them to take advantage of lower energy costs during off-peak hours.
4. Amana washer models with front-loading designs have been proven to be more water and energy-efficient compared to top-loading washers. By using less water and operating at higher spin speeds, they effectively reduce both water consumption and drying times.
5. In order to reset an Amana washer, you can simply unplug the machine from the power source for about one minute, then plug it back in. This action will often resolve minor technical issues and restore the washer to its default settings.
Basic Reset Steps For Amana Washer
When your Amana washer is acting up or not functioning properly, a basic reset might be all that’s needed to get it back on track. Here are the simple steps to reset an Amana washer:
- Turn off the washer by pressing the power button or flipping the switch.
- Unplug the washer from the electrical outlet. This action will disconnect the washer from its power source and allow any residual power to drain.
- Wait for at least 30 seconds to 1 minute before plugging the washer back in. This timeframe provides ample time for the internal components to reset.
- Once the waiting period is over, press and hold the “Spin Speed” and “Soil Level” buttons simultaneously for at least 6 seconds. Then, release the buttons.
- After releasing the buttons, the Amana washer should reset, and you can try running a test cycle to see if the problem has been resolved. If the issue persists, you may need to explore alternative reset methods.
Alternative Reset Method For Amana Washer
If the basic reset steps mentioned above did not solve the issue, an alternative reset method can be attempted. Follow these steps:
-
First, remove the Amana washer from its power source by unplugging it from the electrical outlet or shutting off the circuit breaker that controls the washer’s power.
-
Let the washer rest for at least 2 minutes. This allows any glitches in the control board to clear, erasing any paused commands that might be causing the problem.
-
Within 30 seconds of plugging the washer back in, open and close the washer lid six times in a row, within a 12-second period, ensuring no interruptions. Each time the lid makes contact with the lid switch, you should hear a clicking sound and feel the magnet engage.
-
This alternative method helps to reset the washer by recalibrating the internal sensors and systems. Once the lid has been reopened and closed six times, you can try running a test cycle to see if the issue persists.
Resetting Amana Washer After Power Outage
After experiencing a power outage, it is essential to reset your Amana washer to ensure it functions correctly. Follow these steps:
-
Unplug the Amana washer from the power source for at least 2 minutes. This duration allows the washer’s control board to reset fully.
-
During this time, any lingering paused commands are cleared.
-
After waiting for the specified time period, restore power to the washer by plugging it back into the electrical outlet or turning on the circuit breaker.
-
To finalize the reset process, press and hold the “End Cycle” or “Cycle Signal” button for 20 seconds or until you hear a beep. This action will unlock the lid lock and allow the washer to start.
-
If the lid lock remains defective or inhibited, the washing machine will not operate correctly. In such cases, it is advisable to contact Amana’s customer service or schedule a service call for further assistance.
-
Unplug the Amana washer for at least 2 minutes
- Restore power after the specified time
- Press and hold “End Cycle” or “Cycle Signal” button for 20 seconds or until a beep is heard
- Contact Amana’s customer service or schedule a service call if the lid lock remains defective or inhibited.
Resetting The Lid Lock On Amana Washer
If you need to reset or unlock the lid lock on your Amana washer, follow these steps:
- Unplug the washer from its power source.
- Let the washer rest for 60 seconds to discharge any residual power.
- After the specified time, plug the washer back in to restore power.
- Press and hold the ‘End Cycle’ or ‘Cycle Signal’ button for 20 seconds or until you hear a beep.
- This will reset or unlock the lid lock, allowing you to start using the washer again. If the issue persists, it is recommended to seek professional assistance to repair or replace the lid lock.
Troubleshooting Amana Washer That Won’t Spin
If your Amana washer won’t spin, it can be frustrating. However, there are some troubleshooting steps you can take:
-
Check if the cycle has been accidentally paused. Sometimes, a power surge, power failure, or an unbalanced load can cause the washer to stop or pause itself. To reset the washer, turn it off and unplug it from the wall outlet. Wait for 60 seconds, then plug it back in.
-
Within 30 seconds of plugging the washer back in, open and close the lid six times in a row. This action helps to recalibrate the internal sensors and systems of the washer.
-
Finally, reset the washer to the ‘Spin’ or ‘Final’ cycle and press ‘Start’. This should initiate the spinning action. If the problem persists, it is recommended to contact Amana’s customer service or schedule a service call for further assistance.
Turning Off “Continuous Test Mode” In Amana Washer
“Continuous Test Mode” is a feature found in certain Amana washers, designed to facilitate diagnostics and tests performed by technicians and service professionals. It is important to note that instructions for deactivating this mode cannot be provided to consumers in written form. Instead, they must be conveyed verbally. If you encounter a situation where your Amana washer is stuck in continuous test mode, the recommended course of action is to promptly schedule a service appointment and unplug the washer until the arrival of the service personnel.
Check this out:
Frequently Asked Questions
How do I reset my old Amana washer?
To reset your old Amana washer, start by pressing and holding the Start/Pause button for 3 seconds. Once you do this, all indicator lights should turn off, signifying the reset process. To further clear any previous cycles, rotate the Cycle Selector Knob counter-clockwise (left) to ensure the washer is reset and free from any previous sequencing.
Why is my Amana washer not starting?
If your Amana washer is not starting, it could be due to a lack of proper electrical connection and supply. Firstly, ensure that the power cord is securely plugged into a grounded three-prong outlet and not an extension cord. If it is plugged correctly, next check your household circuit breaker, Ground Fault Circuit Interrupter (GFCI), and/or fuses to ensure they are functioning properly. It is important to ensure that your washer is receiving the correct electrical supply as any issues with the power source can prevent it from starting.
What does reset mean on a washing machine?
When the reset function is activated on a washing machine, it essentially serves as a troubleshooting tool to rectify programming glitches and unwanted settings. This feature is particularly useful when a “delay start” function has been unintentionally selected, allowing users to reset the machine and ensure it operates smoothly according to its intended cycle. By activating the reset option, any program errors are promptly resolved, offering convenience and peace of mind to users in managing their laundry tasks.
How do you reset the control panel on an Amana washer?
To reset the control panel on an Amana washer, you can try a couple of different methods. Firstly, you can unplug the washer from the power source for a few minutes and then plug it back in. This can sometimes reset the control panel and resolve any issues. Alternatively, you can also try pressing and holding the “Cancel” or “Reset” button on the control panel for a few seconds until the panel lights turn off and then release the button. This may also help reset the control panel on an Amana washer.