How to Reset Infrared Heater for Optimal Performance

How to Reset Infrared Heater?

To reset an infrared heater, follow these steps:

1. Turn off and unplug the heater.

2. Let the heater cool down completely.

3. Locate the control panel on the top, front, or side of the unit.

4. Look for a recessed reset button or a toggle reset switch.

5. Press and hold the reset button for 5-10 seconds, or toggle the reset switch off and then back on.

6. Wait a few seconds before plugging the heater back in.

7. Set your desired temperature, fan speed, or other settings.

8. Refer to the manufacturer’s instructions or user manual for specific guidance if needed.

9. Contact customer support if you are unsure about the reset process.

For troubleshooting, try unplugging the heater and plugging it back in after a few minutes if there is no reset button.

Check the power source and thermostat settings if the heater won’t turn on.

Clean the fan if it works improperly.

Remove obstructions to airflow and check for faulty transfers if the heater turns on and off repeatedly.

Address poor insulation or room size if the heater won’t turn off.

To use and maintain an infrared heater, disconnect it from the power source when not in use.

Place the heater in a suitable location with no obstructions.

Clean it regularly to remove dirt and dust, inspect the reflector, and clean the grill to prevent overheating.

Clean the air filter monthly, and replace it every six months.

Inspect pipes and air intake gaps for cracks, corrosion, and dust buildup.

Regular maintenance can help prevent heater failures.

Consider consulting an HVAC professional for maintenance assistance.

Key Points:

  • Turn off and unplug the heater
  • Let the heater cool down completely
  • Locate the control panel and look for a reset button or toggle switch
  • Press and hold the reset button or toggle the switch off and then back on
  • Wait a few seconds before plugging the heater back in
  • Set desired temperature, fan speed, or other settings

Note: Troubleshooting and maintenance tips are also mentioned, such as checking power sources, cleaning the fan, addressing airflow obstructions, and regular maintenance procedures.

Did You Know?

1. The infrared technology used in heaters was actually first developed by NASA to keep astronauts warm in space.

2. Infrared heaters don’t just heat the air around you, they actually heat objects directly, making it a more efficient way to warm up a room.

Related Post:  How Many Watts Does a Space Heater Use and What to Consider for Efficiency

3. Did you know that infrared heaters can also provide health benefits? They have been known to improve blood circulation and even help with pain relief.

4. Some infrared heaters come with a built-in safety feature that automatically shuts them off if they are accidentally tipped over, ensuring your home stays safe.

5. Infrared heaters are also commonly used in saunas, as the gentle heat they emit helps to relax muscles and promote detoxification through sweating.

Resetting A Duraflame Infrared Heater

Resetting an infrared heater is a simple process that can help resolve any issues with the device. If you are using a Duraflame infrared heater and need to reset it, follow these steps:

  1. Turn off the heater and unplug it from the power source. It is important to allow the heater to cool down completely before attempting to reset it.
  2. Locate the control panel on the top, front, or side of the unit. Look for a recessed reset button or a toggle reset switch.
  3. Press and hold the reset button for 5-10 seconds, or toggle the reset switch off and then back on.
  4. Wait a few seconds after completing the reset before plugging the heater back in.
  5. Finally, set the desired temperature, fan speed, or any other settings according to your preference.

For more detailed instructions, always refer to the manufacturer’s instructions or user manual. If you are unsure about any steps, it is recommended to contact customer support for accurate guidance.

Troubleshooting Tips For Infrared Heaters

While resetting the infrared heater can solve many issues, there are other common problems you may encounter. Here are some troubleshooting tips to help you address these issues:

If the heater won’t turn on, unplug it from the power source and plug it back in after a few minutes. This simple power cycle can sometimes resolve the problem. Additionally, check the power source and thermostat settings to ensure they are functioning correctly.

If the heater turns on but doesn’t work properly, the fan may need cleaning. Over time, dust and debris can accumulate and hinder the fan’s performance. Cleaning the fan regularly can improve its efficiency and restore the heater’s functionality.

If the heater turns on and off repeatedly, there may be obstructions to airflow or faulty heat transfers. Ensure that there are no objects blocking the heater’s vents or obstructing the airflow. Additionally, inspect the heat transfers for any signs of damage or malfunction.

Related Post:  How to Clean a Space Heater: Essential Maintenance Tips

If the heater won’t turn off, it could be due to poor insulation or the heater being too powerful for the room size. Adequate insulation can help maintain a consistent temperature and prevent the heater from running continuously. Assess the insulation in the room and consider adjusting the size or power of the heater accordingly.

Using And Maintaining An Infrared Heater

To ensure optimal performance and longevity of your infrared heater, it is crucial to follow these tips for usage and maintenance:

  • After using the infrared heater, always disconnect it from the power source. This precautionary measure prevents any potential accidents or malfunctions when the heater is not in use.
  • Choose a suitable location for the heater and keep it unrestricted. Infrared heaters emit heat and require some space around them for proper operation. Be sure to place the heater away from any obstructions and allow for adequate airflow.
  • Regularly clean the heater from dirt and dust. Dust and debris can accumulate on the heater’s exterior, which can impact its performance. Wipe down the surfaces with a soft cloth or use a vacuum cleaner with a brush attachment to remove any buildup.
  • Inspect the reflector and clean the grill regularly. The reflector helps distribute heat evenly, so any damage or soiling can affect heat dispersion. Use a soft cloth or a mild cleaning solution to clean the reflector and grill, making sure not to use any abrasive materials.
  • Clean the air filter monthly and replace it every six months. The air filter keeps the heater free from dust and other airborne particles. Regular cleaning and replacement ensure that the heater operates efficiently and maintains good air quality.
  • Inspect pipes and air intake gaps for cracks, corrosion, and dust buildup. Over time, these components can become damaged or clogged, hindering the heater’s performance. Regularly check for any signs of wear or buildup and address them accordingly.
  • Regular maintenance by an HVAC professional can help prevent major heater failures and prolong the lifespan of the device. It is recommended to schedule regular maintenance appointments to ensure that your infrared heater is in optimal condition.
Related Post:  What Is a Salamander Heater and How Does it Work?

In conclusion, resetting an infrared heater is a straightforward process that can help resolve issues and bring the device back to its optimal performance. Troubleshooting tips can help address common problems such as power failures, fan issues, and inadequate heating. By following maintenance practices, you can ensure that your infrared heater remains efficient and lasts for a long time. Remember to refer to the manufacturer’s instructions or user manual for specific guidelines and contact customer support if needed.


Check this out:


Frequently Asked Questions

How do you reset an infrared electric heater?

To reset an infrared electric heater, begin by turning it off and disconnecting it from the power source. Make sure to clear any blockages from the air vents and wait for the heater to cool down completely for about 10-15 minutes. Once cooled, locate the reset button on the heater and press and hold it for a few seconds until you hear a click. This will reset the heater and allow for normal operation.

How do I reset my smart heater?

To reset your smart heater, start by ensuring that it is placed upright on a stable surface. By doing so, the heater will automatically power on and establish a WiFi connection if it was previously set up. Wait for approximately 2 minutes, and your device will be ready to be controlled once again through the app or smart speaker, granting you full control and functionality over your heater.

What are the settings on an infrared heater?

The infrared heater offers three power settings: Auto, Low 1000W, and High 1500W. The Auto mode is an energy-saving option that allows you to set the temperature range between 50-86F. This intelligent setting selects between the Low and High power options based on the current room temperature, ensuring optimal comfort and energy efficiency.

Is there a reset button on a heater?

Yes, there is a reset button on a heater. In the case of a central heating and air system, the reset button can be found on the blower motor. To make it easily noticeable, the reset button is often painted in a vibrant color such as red or yellow. When it is popped, it will protrude about half an inch from its usual position, making it easy to identify.

References: 1, 2, 3, 4