How to Reset Whirlpool Duet Dryer Sensing Successfully
How to Reset Whirlpool Duet Dryer Sensing?
To reset the sensing function on a Whirlpool Duet dryer, start by checking the power source and ensuring other appliances are working.
If there is no power, check for a power outage, blown fuse, or tripped circuit breaker.
If the power is fine, check the electric cord on the dryer.
To reset the dryer, press the start button for five seconds or check for error codes on the control board and press the start button again for five seconds.
If the issue persists, it may be necessary to replace the sensor strips or seek help from a technician.
Key Points:
- Check power source and ensure other appliances are working
- If no power, check for power outage, blown fuse, or tripped circuit breaker
- Check electric cord on dryer
- Press start button for five seconds to reset the dryer
- Check for error codes on control board and press start button again for five seconds to reset
- If issue persists, replace sensor strips or seek help from technician
Did You Know?
1. The Whirlpool Duet Dryer has a hidden diagnostic test mode that can help troubleshoot common issues with the sensing feature. To access this mode, press and hold the “Control Lock” button for three seconds, then release it and immediately press and hold the “Start” button for three seconds. The display will show different codes indicating the specific problem.
2. Did you know that the Whirlpool Duet Dryer’s sensing feature uses moisture sensors to detect the level of dampness in the clothes? These sensors measure the electrical resistance of the clothes, allowing the dryer to determine the appropriate drying time.
3. If you ever face issues with the Whirlpool Duet Dryer’s sensing feature malfunctioning, it’s worth checking the exhaust vent for any clogs or obstructions. A blocked vent can interfere with the dryer’s ability to sense moisture correctly, leading to improper drying or lengthy drying times.
4. In some cases, the sensitivity of the Whirlpool Duet Dryer’s moisture sensors can be affected by using dryer sheets or fabric softeners. Residue from these products can build up on the sensors over time, affecting their accuracy. To address this, periodically wipe the sensors with a soft cloth to ensure proper functioning.
5. The Whirlpool Duet Dryer’s sensing feature can help conserve energy by automatically adjusting the drying time based on the level of dampness detected in the clothes. This feature not only helps protect your clothes from potential damage caused by over-drying but also promotes energy efficiency by avoiding unnecessary drying cycles.
Introduction To Whirlpool Duet Dryer Sensing Function
The Whirlpool Duet dryer is a popular appliance known for its advanced sensing function. This dryer is equipped with sensor strips in its tub, which enable it to accurately detect when your laundry is dry. As a result, it can carry out efficient and effective drying cycles.
However, there may be occasions when the sensing system encounters issues, such as premature cycle endings or failure to recognize when laundry is dry. In such cases, it is essential to know how to reset the Whirlpool Duet dryer sensing function.
Here is a step-by-step guide to successfully resetting the sensing function of your Whirlpool Duet dryer:
- Unplug the dryer: Ensure the dryer is disconnected from the power source to prevent any electrical accidents.
- Wait for a few minutes: Allow the dryer to remain unplugged for approximately 5 minutes. This will allow the internal systems to reset.
- Plug the dryer back in: After the waiting period, reconnect the dryer to the power source.
- Select a new cycle: Choose a new drying cycle and start the dryer. This will initiate the reset process.
- Observe the sensing function: During the new cycle, pay attention to whether the sensing function is working properly. Check if the dryer accurately detects when your laundry is dry.
If these steps do not resolve the issues with the sensing function, it is recommended to consult the Whirlpool Duet dryer’s user manual or contact Whirlpool customer support for further assistance.
Common Issues With The Sensor Strips
One common issue that can occur with the Whirlpool Duet dryer is the degradation of its sensor strips. Over time, these strips may wear off, leading to inaccurate sensing results. In such cases, it is recommended to replace the worn-out sensor strips.
To do this, begin by removing the lint screen casing. Detach the sensor wiring and carefully replace the malfunctioning strips with new ones. Once the repair is complete, plug in the dryer and perform a test by running a cycle with wet towels. If the issue persists, it is advisable to contact Whirlpool customer support for further assistance.
Troubleshooting Power Supply Problems
Before proceeding with the reset process, it is crucial to ensure that your Whirlpool Duet dryer has a stable power supply. Start by checking the power source and verifying that other appliances connected to the same electrical circuit are functioning properly. In the event of a power outage, blown fuse, or tripped circuit breaker, the dryer may not receive power. Address these issues accordingly, and if the power is fine, inspect the electric cord on the dryer itself. Make sure it is securely connected and undamaged. If power-related problems persist, consider unplugging the dryer for a few minutes and pressing the reset or start button to turn it back on.
Resetting The Dryer: Button Press Technique
To reset the sensor function on your Whirlpool Duet dryer, follow these steps:
- First, check if any other buttons on the control panel are stuck or malfunctioning.
- Once everything is in order, press and hold the start button for five seconds.
- Take note of any error codes displayed on the control board for further troubleshooting.
- Release the start button and press it again for another five seconds.
- This button press technique effectively resets the sensor and should resolve any sensing issues you may be experiencing.
Resolving Error Codes And Malfunctioning Issues
Error codes are indicators of specific issues within the Whirlpool Duet dryer. One common error code is AF, which points to low airflow. If you encounter this error, check the lint screen and vents for any blockages. Clear the lint screen and ensure that proper airflow is established. To reset the dryer for other error codes or malfunctioning issues, follow the troubleshooting steps provided in the user manual. In certain cases, a general reset can be performed by unplugging the power supply, waiting for 30 minutes, and then reconnecting the power.
- Check the lint screen and vents for blockages
- Follow the troubleshooting steps in the user manual for other error codes or malfunctioning issues
- Perform a general reset by unplugging the power supply, waiting for 30 minutes, and then reconnecting the power.
Safety Precautions And Seeking Technical Support
When dealing with repairs or replacement of the sensor unit, it is important to take necessary safety precautions. Always unplug the dryer before attempting any repair work. If you are not confident in your ability to repair the dryer yourself, it is advisable to seek help from a qualified technician.
Additionally, if your Whirlpool Duet dryer is still under warranty, there may be options for free or discounted repairs. Contact Whirlpool customer support for guidance and assistance. Remember, your safety is paramount, so do not hesitate to ask for professional help if needed.
Check this out:
Frequently Asked Questions
How do I reset my Whirlpool dryer sensor?
To reset the sensor on your Whirlpool dryer, start by unplugging the appliance. Next, locate the reset button, typically located on the control panel or inside the dryer door. Press and hold the reset button for a few seconds, then release it. Afterward, plug the dryer back in and test it to ensure that the sensor has been successfully reset. Following these steps should effectively reset the sensor on your Whirlpool dryer.
How do I reset my Whirlpool dryer duet?
To reset your Whirlpool dryer duet, begin by disconnecting the dryer’s power cord from the electrical outlet. It is essential to wait for a minimum of 5 minutes before plugging the dryer back in. Once the waiting period is over, reconnect the dryer cord to the power source. After ensuring the dryer is properly plugged in, press the start switch to check if the error code has been successfully cleared.
Why does my Whirlpool duet dryer say sensing?
When your Whirlpool Duet dryer displays the “Sensing” message, it is indicating that the moisture sensor on the dryer is actively working during Sensor Cycles. The moisture sensor plays a crucial role in measuring the dampness of the load and ensuring that the drying process is efficient. By continuously monitoring the moisture levels, the dryer can adjust the drying time accordingly, preventing over-drying or under-drying of your clothes. Hence, the “Sensing” message acts as a reassurance that the dryer is actively utilizing its sensor technology to deliver optimal drying results.
How can I reset the sensing feature on my Whirlpool Duet dryer to troubleshoot any sensor-related issues?
To reset the sensing feature on your Whirlpool Duet dryer, there are a few steps you can follow. Firstly, make sure the dryer is turned off and unplugged from the power source. Leave it unplugged for a minute or two to allow the internal sensors to reset. Then, plug it back in and turn it on. This should reset the sensing feature and troubleshoot any sensor-related issues that may be causing problems.
If the above method doesn’t solve the problem, you can also try another reset option. Press and hold the “Control Lock” button for about three seconds. This will disable the control panel and reset the sensors. After a few seconds, release the button and try using the dryer again. These reset methods should help troubleshoot sensor-related issues in your Whirlpool Duet dryer.