How to Reset Whirlpool Washer and Troubleshoot Common Issues

How to Reset Whirlpool Washer?

To reset a Whirlpool washer, you can perform a power cycle.

Start by unplugging the machine and pressing the Start/Pause button for 5 seconds.

Wait for 5 minutes, then plug it back in.

By turning off the power and allowing the circuits to clear out, a reset can fix minor software issues and clear error codes.

However, it’s essential to note that resetting doesn’t fix hardware problems.

If a reset doesn’t work, it’s recommended to address the physical problem causing the error code and then proceed with resetting the machine.

Key Points:

  • Perform a power cycle to reset a Whirlpool washer
  • Unplug the machine and press the Start/Pause button for 5 seconds
  • Wait for 5 minutes, then plug it back in
  • Resetting can fix minor software issues and clear error codes by clearing out the circuits
  • Resetting does not fix hardware problems
  • If a reset doesn’t work, address the physical problem causing the error code before attempting to reset again.

Did You Know?

1. A little-known fact about Whirlpool washers is that they were originally called Upton Machine Company when founded in 1911 before changing their name to Whirlpool Corporation in 1950.

2. Did you know that Whirlpool Corporation is not only known for their home appliances but has also played a part in space exploration? Whirlpool designed and manufactured the washers and dryers used on NASA’s space shuttles, ensuring astronauts had clean clothes while in orbit.

3. In 2001, Whirlpool introduced a groundbreaking technology called Sixth Sense, which allowed their washers to automatically adjust water levels, detergent dosage, and cycle times based on the load size and type of fabric. This innovative feature helped conserve water and optimize cleaning performance.

4. Whirlpool has a unique connection to the popular reality TV show “Survivor.” The series’ iconic logo of a burning torch was actually inspired by a Whirlpool washer’s logo, known as the Whirlpool Flame Control. The creator of “Survivor” came across the washer’s logo while looking for ideas and found it fitting for the show’s theme of survival.

5. If you ever wondered how often the average Whirlpool washer is used, it is estimated to be approximately 350 to 400 times per year. That means Whirlpool washers handle a substantial number of laundry loads, making their reliability and durability crucial for routine household chores.

Power Cycle Reset For Whirlpool Washers

Whirlpool washers are renowned for their high quality, reliability, durability, and range of advanced features. However, like any other electronic device, they may encounter minor software issues or error codes from time to time. Resetting a Whirlpool washer through a power cycle is often the first troubleshooting step and can often fix these problems.

To perform a power cycle reset, follow these steps:

  • Unplug the Whirlpool washer from the power outlet. This will ensure that the machine is completely disconnected from the power source.

  • Locate the Start/Pause button on the control panel. Press and hold this button for 5 seconds. This step is essential as it helps to discharge any residual electricity in the washer’s circuits.

  • After pressing the button for 5 seconds, release it and wait for 5 minutes. This waiting period allows the machine’s internal components to fully discharge and the circuits to clear out.

  • After the 5-minute interval, plug the Whirlpool washer back into the power outlet.

Performing the power cycle reset should clear any minor software glitches or error codes that may have caused the washer to malfunction. However, it is important to note that a power cycle reset will not fix hardware problems. If the issue persists after the reset, it may require a more in-depth troubleshooting approach or professional intervention.

Related Post:  How to Fix E2 Error in Washing Machine: Troubleshooting Tips and Solutions

Fixing Software Issues And Clearing Error Codes

To effectively fix minor software issues and clear error codes on a Whirlpool washer, resetting is often the solution. However, it is important to address the underlying cause of these error codes to prevent them from reoccurring.

To fix a Whirlpool washer after resetting, follow these steps:

  1. Identify the specific error code displayed on the control panel. Each error code corresponds to a specific issue that needs to be resolved.

  2. Refer to the Whirlpool washer’s user manual or online resources to understand the meaning of the error code. This will help you pinpoint the exact problem and guide you in fixing it.

  3. Fix the physical problem causing the error code. This may involve checking and cleaning filters, unclogging hoses, or replacing faulty components.

  4. Once the physical issue has been resolved, perform the power cycle reset as described earlier.

Resetting the washer after addressing the specific error code will help ensure that the machine functions properly again. It is important to note that resetting alone will not fix the underlying problem, so it is crucial to fix the hardware issue before resetting the washer.

Resetting Whirlpool Cabrio Washers

Whirlpool Cabrio washers are a popular line of Whirlpool washing machines known for their advanced features and efficient performance.
To reset a Whirlpool Cabrio washer, follow these steps:

  1. Press any button on the display pad or press the “Pause” or “Cancel” button to clear any error codes displaying on the control panel.

  2. Unplug the Whirlpool Cabrio washer from the power outlet or turn off the breaker that supplies power to the machine. Leave it in this state for about five minutes.

  3. After the five-minute interval, restore power to the washer by plugging it back in or turning the breaker back on.

Performing this reset process for Whirlpool Cabrio washers can help alleviate software issues and clear error codes. If the problem persists after the reset, it is recommended to consult the user manual or contact Whirlpool customer support for further assistance.

Related Post:  How to Stop Speed Queen Washer Mid Cycle: Troubleshooting Tips to Preserve Your Laundry and Prevent Damage

Resetting Whirlpool Washers With Dials

Some older models of Whirlpool washers feature traditional dials instead of electronic display panels. The reset process for these washers involves manipulating the dial in a specific sequence. Follow the steps below to reset Whirlpool washers with dials:

  • Turn off the Whirlpool washer by pressing the power button or by rotating the dial to the “Off” position.

  • Set the mode dial to the “Normal” or “Regular” cycle. This will be the starting point for the reset sequence.

  • Rotate the dial counterclockwise three times, pausing briefly at each quarter turn. After the third counterclockwise rotation, leave the dial in the “Home Position.”

  • Rotate the dial clockwise one click, then counterclockwise one click. Repeat this sequence three times, pausing briefly at each point. After the third sequence, leave the dial in the “Home Position.”

  • After completing the reset sequence, press the “Start” button to confirm that the washer has been successfully reset.

Resetting Whirlpool washers with dials using this specific sequence can help fix software issues and clear error codes. However, if the problem persists after the reset, it is advisable to consult the user manual or contact Whirlpool customer support for further guidance.

Confirming A Successful Reset

After performing a reset on your Whirlpool washer, it is important to verify that the reset was successful. Here are the steps to confirm a successful reset:

  1. Press the “Start” button on the control panel. If the reset was successful, the washer should initiate the selected cycle.

  2. Check the lights on the control panel. Depending on the model and the specific reset performed, certain lights may illuminate to indicate a successful reset.

  3. To ensure the washer is functioning properly, it is recommended to unplug the machine for around 10 seconds and then run a test load without any clothes. This will help verify that the reset has resolved the issue and the washer is operating as intended.

If the reset process does not yield the desired outcome or the problem persists, it is advisable to consult the user manual or contact Whirlpool customer support for further assistance.

  • Press “Start” button to initiate the selected cycle
  • Check control panel lights for indications of successful reset
  • Unplug the machine for 10 seconds and run a test load without any clothes.

Troubleshooting Tips For Unresponsive Washers

If a Whirlpool washer becomes unresponsive even after a reset, there are a few troubleshooting tips you can try:

  • Check if the lid of the washer is securely closed and properly aligned. If the lid is not closed or aligned correctly, the washer may not turn on.
  • Inspect the power cord and ensure it is not damaged or frayed. A damaged power cord can prevent the washer from receiving power.
  • Verify that the power outlet is functioning correctly by plugging in another electronic device. If the outlet is not providing power, try using a different outlet.
  • If the above steps do not resolve the issue, it is recommended to consult the user manual or contact Whirlpool customer support for further assistance. They will be able to guide you through additional troubleshooting steps or arrange for professional service if necessary.
Related Post:  How to Reset Amana Washer: Quick Guide for Troubleshooting

Resetting a Whirlpool washer can be a useful troubleshooting step to fix minor software issues and clear error codes. Whether you have a Whirlpool washer with dials or a Whirlpool Cabrio washer with electronic controls, the reset process is relatively straightforward. However, it’s important to understand that resetting alone will not fix hardware issues. If the problem persists, consult the user manual or contact Whirlpool customer support for further assistance.


Check this out:


Frequently Asked Questions

Do Whirlpool washers have a reset button?

Whirlpool washers do not have a specific reset button. However, the most effective way to reset a Whirlpool washer is by performing a power cycle. This can be done by unplugging the washer, pressing the Start/Pause button for 5 seconds, waiting for 5 minutes, and then plugging the washer back in. By following this power cycle procedure, the washer’s settings can be reset and any potential issues may be resolved.

How do I reset my Whirlpool touch screen washer?

To reset the touchscreen on your Whirlpool washer, you have a couple of options. One method is to press and hold the power/reset button until all the lights on the touchscreen shut off. This will trigger a reset, with the indicator lights flashing as confirmation. Alternatively, you can unplug the washer and wait for five to ten minutes before plugging it back in. This will also reset the touchscreen and allow you to start fresh.

How do I reset my Whirlpool dual washer?

To reset your Whirlpool dual washer, start by pressing and holding the “End of Cycle Signal” button for 3 seconds. This should reset the Control Lock and restore normal operation. However, if you’re still encountering issues after trying this method, it’s advisable to continue troubleshooting or seek further assistance. Referring to the user manual or contacting Whirlpool’s customer support can provide guidance on resolving any persistent problems.

How to do a factory reset on Whirlpool dishwasher?

To initiate a factory reset on your Whirlpool dishwasher, begin by disconnecting the power cable or disabling the circuit breaker. Allow a 12-15 minute interval before reestablishing power by plugging in the cable or turning the circuit breaker back on. Once power is restored, switch on the dishwasher and access the control panel to select either the “High” setting or, if available, the “Pots and Pans” option. This process will initiate the factory reset and restore your dishwasher to its original settings.

References: 1, 2, 3, 4