How to Store Portable Air Conditioner?
To store a portable air conditioner, first unscrew the hose from the exhaust port in the back and the front of the sliding kit.
If you have a NewAir AC12200E model, use the special storage space on top of the unit for the hose and remote control.
Next, remove the slider kit from the window and take out the screws holding the extendable bolt in place.
Retract the bolt into the housing.
The window kit is now ready for storage.
- Unscrew the hose from the back and front of the sliding kit.
- For the NewAir AC12200E model, use the special storage space on top for the hose and remote control.
- Remove the slider kit from the window and take out the screws holding the extendable bolt in place.
- Retract the bolt into the housing.
- The window kit is now ready for storage.
- Ensure proper storage of the portable air conditioner to maintain its condition.
Did You Know?
1. The first portable air conditioner was actually invented in 1902 by Willis Carrier, who initially designed it to help regulate humidity in a printing company.
2. Portable air conditioners should always be stored upright to prevent any oil leakage from the compressor system. Tilting or storing the unit on its side can cause damage to the internal components.
3. Contrary to popular belief, portable air conditioners do not actually create cold air. Instead, they remove heat and humidity from the air, producing a cooling effect similar to traditional air conditioning systems.
4. When storing a portable air conditioner, it’s important to clean and empty the condensate tank, if applicable, to prevent any mold or bacteria growth in the standing water. It’s also recommended to clean the filters and remove any dust or debris that may have accumulated.
5. To improve the efficiency of your portable air conditioner, it is suggested to store it in a well-ventilated area away from other heat-producing appliances. Additionally, keeping the unit away from direct sunlight can help reduce its workload and preserve its longevity.
Window Kit Components And Setup
When it comes to portable air conditioners, the window kit plays a crucial role in venting the hot air from the compressor. This kit typically consists of two main parts: an extendable hose and a slider kit. The extendable hose allows for flexible positioning, while the slider kit creates a seal between the window and the hose to prevent air leakage.
Understanding the components of the window kit and how to set it up properly is important for efficient air conditioning and for storage purposes.
To set up the window kit, start by attaching the extendable hose to the exhaust port located at the back of the portable air conditioner. Make sure the connection is secure.
Next, place the slider kit in the window opening and adjust the length according to the size of the window. The slider kit should fit snugly against the window frame to prevent any air from escaping.
Once the window kit is properly set up, the portable air conditioner is ready for use.
Detaching The Hose From The Portable Air Conditioner
When storing your portable air conditioner, it is crucial to detach the hose from the unit. Here are the steps to follow:
- Locate the exhaust port at the back of the portable air conditioner where the hose is connected.
- Depending on the model, you may need to unscrew the hose from the port.
- Carefully loosen the connection and make sure there are no kinks or bends in the hose.
- In addition, detach the hose from the front of the slider kit.
Once both ends of the hose are disconnected, you can proceed with the next steps of the storage process.
Detach the hose from the exhaust port at the back of the unit.
- Ensure there are no kinks or bends in the hose.
- Remove the hose from the front of the slider kit.
Remember to take these necessary steps to properly store your portable air conditioner.
Special Storage Space For NewAir AC12200E Model
If you own a NewAir AC12200E Portable Air Conditioner, you’re in luck. This model has a special storage space on top of the unit designed for the hose and remote control. This feature greatly simplifies the storage process, keeping all components neatly in one place. It’s a convenient solution for future use. Before proceeding to the next steps, make sure to securely place the hose and remote control within the storage compartment.
Removing The Slider Kit From The Window
To store a portable air conditioner properly, it is essential to remove the slider kit from the window. Start by carefully lifting the window sash and sliding the kit out. Take note of any screws that may be holding the extendable bolt in place. Locate these screws and remove them to free the bolt from the slider kit. Once the screws are removed, gently retract the bolt back into its housing, ensuring that it is fully retracted. This step prepares the slider kit for proper storage and removes any potential hazards.
Retracting The Bolt And Preparing For Storage
After detaching the slider kit from the window, retracting the bolt is a crucial step for safe and compact storage of the window kit. Start by locating the housing for the bolt and carefully guide it back into place until fully retracted. Make sure to securely lock the bolt in its housing to prevent any accidental movement and potential damage when storing the window kit.
Final Steps: Storing The Window Kit
Storing a Portable Air Conditioner Properly
To store a portable air conditioner properly, follow these steps:
- Gather all the necessary components: Collect the detached hose, remote control (if applicable), slider kit, and any screws that were removed during the process.
- Organize and protect the parts: Consider using a secure container or bag to keep all the components organized and protected.
- Choose a suitable storage location: Store the window kit in a dry and safe location, away from extreme temperatures or moisture that could cause damage.
- Ensure accessibility and condition: Proper storage will ensure that all the components are readily available and in good condition for future use.
Keep in mind that proper storage is essential for maintaining the functionality and prolonging the lifespan of your portable air conditioner. By knowing the components of the window kit, detaching and retracting necessary parts, and storing everything in a safe manner, you can ensure that your portable air conditioner is in optimal condition for years to come.
Check this out:
Frequently Asked Questions
How do you store a portable air conditioner when not in use?
To properly store a portable air conditioner when not in use, it is important to keep the unit indoors in a dry location. A wetness level that exceeds 50% should be avoided as it can promote the growth of mold and other harmful bacteria. If storing the unit is not an option, investing in a specially designed cover can help protect it. It is crucial to remember that portable air conditioners collect water as they cool, so proper storage should consider effective dehumidification to maintain the unit in optimal condition.
Can portable air conditioners be stored on their side?
No, portable air conditioners should not be stored on their side. It is crucial to always keep them upright to prevent any damage. Placing them on their sides or upside down can result in irreversible damage to the unit, rendering it inoperable. Thus, it is essential to store portable air conditioners in an upright position to ensure their longevity and proper functioning.
What is the proper way to store an air conditioner?
To ensure the proper storage of an air conditioner, it is crucial to always keep it upright. Storing it on its back or side can cause severe damage to the compressor, resulting in costly repairs and maintenance requirements. Maintaining an upright position not only prevents potential damages but also allows the oil within the unit to resettle, ensuring optimal functioning when it is time to use the air conditioner again. By following these guidelines, you can safeguard your AC unit and prolong its lifespan.
Should I unplug my portable AC when not in use?
Yes, it is highly recommended to unplug your portable AC when not in use. Apart from saving you money in the long run, it also contributes to reducing your carbon footprint and overall environmental impact. By simply unplugging, you are actively taking a small but impactful step towards a more sustainable future for the Earth and all its inhabitants. So, make it a habit to unplug your portable AC when not in use and join the effort to create a greener planet for generations to come.