How to Wash Sunbeam Electric Blanket: A StepbyStep Guide
How to Wash Sunbeam Electric Blanket?
To wash a Sunbeam electric blanket, it is important to disconnect the cord from the outlet and remove the control cord beforehand to prevent fire hazards.
Check for any worn-out parts, especially cords and wires, before washing.
Sunbeam blankets should not be dry cleaned.
The control and cords should not be wet or submerged in water during washing.
It is recommended to soak the blanket in cold water and mild detergent before washing.
Use the gentle cycle setting on the washing machine with cold water and mild detergent, agitating for 2 to 3 minutes before rinsing.
Avoid using commercial dryers with high temperatures.
Instead, preheat the household dryer for 2 minutes at low temperature and tumble dry the blanket for 10 minutes or partially dry in the dryer for about 20 minutes before air drying on a clothesline or drying rack.
High heat may damage the insulation of the wires.
Thoroughly air dry the blanket before reconnecting it to the power.
Key Points:
- Disconnect and remove control cord to prevent fire hazards.
- Check for worn-out parts before washing.
- Do not dry clean Sunbeam blankets.
- Do not wet or submerge control and cords in water.
- Soak blanket in cold water and mild detergent before washing.
- Use the gentle cycle setting on washing machine with cold water and mild detergent.
Did You Know?
1. While it is recommended to wash your Sunbeam Electric Blanket at least once a year, did you know that you should never wash it in a top-loading washing machine? The agitator in these machines can potentially damage the internal heating elements of the blanket.
2. To ensure an optimal washing experience, it is best to use a front-loading washing machine when cleaning your Sunbeam Electric Blanket. This type of machine reduces the risk of tangling or damaging the delicate wiring within the blanket.
3. If your Sunbeam Electric Blanket has detachable cords and controls, always remove them before washing. This not only facilitates a more thorough cleaning process but also protects the electrical components from water damage.
4. Surprisingly, hand-washing your Sunbeam Electric Blanket is not recommended. The excessive wringing and manipulation can cause damage to the internal wiring and compromise the blanket’s functionality.
5. After washing your Sunbeam Electric Blanket, it is important to let it air dry. Avoid using a dryer, as the excessive heat can be detrimental to the blanket’s electrical components. Instead, hang it up or lay it flat until it is completely dry before using it again.
Safety Precautions For Washing Your Sunbeam Electric Blanket
Using an electric blanket is a convenient and efficient way to stay warm during the colder months. However, it is essential to follow safety precautions to prevent any fire hazards or damage to the blanket.
When washing your Sunbeam Electric Blanket, it is recommended to:
- Disconnect the cord from the outlet
- Remove the control cord
This ensures that the blanket is not connected to any power source, reducing the risk of electrical accidents.
Additionally, it is crucial to check for worn-out parts, especially cords and wires. Any damages should be repaired or replaced before washing.
Please note that dry cleaners should not be used on Sunbeam blankets, as they may use chemicals or processes that could damage the electrical components.
Washing Instructions For Sunbeam Electric Blankets
Sunbeam allows the use of a washing machine for their blankets, throws, and mattress pads, making the cleaning process more convenient.
Before washing the blanket, it is advisable to soak it in cold water with a mild detergent. This helps to remove any stains or dirt, making the washing process more effective.
Once the blanket has been soaked, it can be loaded into the washing machine. Remove all cords and controls before putting the blanket in the machine. This prevents any damage to the electrical components and ensures a thorough clean.
When loading the blanket, it should be loosely spread around the drum in a standard washer or in a high-efficiency washer.
The blanket should be washed in the washer’s gentle cycle for around 2 minutes, using cold water and a mild detergent.
Avoid adding bleach, sprays, or mothballs, as these can damage the blanket’s material and electrical components.
- Soak the blanket in cold water with a mild detergent
- Remove all cords and controls before washing
- Loosely spread the blanket in the washing machine
- Wash on gentle cycle for 2 minutes with cold water and mild detergent
- Do not use bleach, sprays, or mothballs
“The cleaning process for Sunbeam blankets involves soaking the blanket, removing cords and controls, loosely spreading it in the washing machine, washing on gentle cycle, and avoiding damaging substances.
Drying Recommendations For Sunbeam Electric Blankets
After the washing cycle is complete, it is essential to properly dry the Sunbeam Electric Blanket to prevent any damage. Commercial dryers with high temperatures should be avoided, as they can shrink the blanket and damage the insulation of the wires. Sunbeam recommends partially drying the blanket in a household dryer for around 20 minutes using a low temperature or air-only setting. This step helps to remove excess moisture from the blanket. After partially drying in the dryer, the blanket should be removed and allowed to finish air-drying on a clothesline or drying rack. This will ensure that the blanket is completely dry before reuse. It is crucial to thoroughly air dry the blanket before reconnecting it to the power and using it again.
Stain Removal Tips For Electric Blankets
Accidents happen, and stains may occur on your Sunbeam Electric Blanket. It is important to treat stains quickly to prevent them from setting and becoming difficult to remove. To remove stains from the fabric, you can:
- Use an old credit card or fingernail to gently scrape off any excess debris.
- Apply a small amount of mild laundry detergent to the stained area and rub it gently with a cloth or sponge.
- Rinse the area with cold water to remove any remaining detergent.
It is crucial to follow specific stain removal guidelines for each type of stain, as some stains may require different treatment methods.
Remember to avoid using bleach or fabric softener on the blanket, as these can damage the material and affect the electrical components.
Note: Always test any cleaning solution on a small, inconspicuous area of the blanket before applying it to the stained area.
“Preventing and treating stains promptly is essential for maintaining the cleanliness and longevity of your Sunbeam Electric Blanket.”
Maintaining And Repairing Your Electric Blanket
To ensure the longevity and optimal performance of your Sunbeam Electric Blanket, proper maintenance and timely repairs are essential. If the blanket stops working or shows any signs of malfunction, it should be unplugged and checked for any loose connections. Cracked or discolored components should be replaced to avoid any hazards. Small tears or rips on the blanket’s fabric can be repaired with matching thread and a needle. However, if the rip exposes any wires or electrical components, it is crucial to discard the blanket for safety reasons.
It is important to note that electric blankets should not be ironed. Any wrinkles can be hung out, and gravity will help pull them out naturally. Regularly washing and drying the blanket completely will keep it in good condition and free from dirt and dust.
Proper Storage And Care For Sunbeam Electric Blankets
When not in use or during the warmer months, proper storage and care are necessary to maintain the quality and performance of your Sunbeam Electric Blanket. Before storing the blanket, it should be washed and dried completely to remove any dirt or moisture. It is also important to check the controls and cords for any cracks or darkened areas. If any damages are found, it is recommended to replace the blanket for safety reasons.
When storing the blanket, it should be rolled gently to avoid sharp folds that can damage the wires or material. The blanket should be stored in a dry, climate-controlled space that is free from insects and rodents. Additionally, it is advisable to store the controls and cords unplugged to prevent any accidental power connection. You can place the cords and bedding in a soft cloth bag or plastic container to prevent dust from settling.
In conclusion, washing your Sunbeam Electric Blanket is a simple process if you follow the recommended guidelines. It is crucial to prioritize safety precautions such as disconnecting the cord, checking for worn-out parts, and avoiding dry cleaners. Proper washing and drying techniques will ensure the cleanliness and performance of the blanket. Timely stain removal, maintenance, and repairs are also essential to keep the blanket in optimal condition. Finally, proper storage and care will prolong the lifespan of the electric blanket and ensure its functionality for years to come.
- Properly store and care for your Sunbeam Electric Blanket
- Wash and dry the blanket completely before storage
- Check controls and cords for any damages
- Replace the blanket if any damages are found, for safety reasons
- Roll the blanket gently to avoid sharp folds
- Store the blanket in a dry, climate-controlled space
- Store the controls and cords unplugged
- Use a soft cloth bag or plastic container to prevent dust settling.
Frequently Asked Questions
Can you put an electric blanket in the washing machine?
Yes, you can safely put your electric blanket in the washing machine, provided that the care tag states it is safe to do so. However, it is important to follow specific guidelines for washing, such as using a gentle and short cycle with minimum agitation and the appropriate water temperature. Additionally, extra caution should be taken due to the presence of the heating element in the blanket.
Can you wash a Sunbeam blanket?
Yes, you can safely wash a Sunbeam blanket. These blankets are designed to be fully machine washable and dryer safe as they come with detachable controllers. Alternatively, if you prefer a more gentle approach, you can hand wash the blanket and let it air dry. Sunbeam® gives you the flexibility to choose the washing method that suits you best while ensuring your blanket maintains its quality and functionality.
What is the best way to wash an electric blanket?
To effectively wash an electric blanket, it is advised to utilize a gentle cycle on your washing machine using cool or warm water and a mild laundry detergent. It is important to note that some older electric blankets may not be suitable for machine washing and should be cleaned by hand. For drying, the electric blanket can be partially dried in a clothes dryer at a low heat setting, but it is recommended to air-dry it completely for optimal results.
Are Sunbeam heated throws washable?
Yes, Sunbeam heated throws are indeed washable. With their special waterproof heating elements, you can safely wash them either by machine or by hand. Additionally, they can be tumble dried, making the cleaning process even more convenient. With the added 3-hour auto-off safety feature, these throws offer both comfort and peace of mind.
