What Does F20 Mean on a Washer? Troubleshooting Tips & Solutions to Fixing the Error
What Does F20 Mean on a Washer?
F20 on a washer indicates a water inlet problem.
This error code typically means that there is either no water or insufficient water supply reaching the washer.
To resolve this issue, you can start by pressing PAUSE/CANCEL twice to cancel the current cycle.
Then, unplug the washer or disconnect the power.
Check if both the hot and cold water faucets are fully turned on and inspect the screens at the inlet hose connection for any clogs.
Make sure that the water inlet hoses are not kinked or frozen.
Afterward, plug in the washer or reconnect the power, reselect the cycle, and press START.
If the problem persists, it is recommended to call for service.
Additionally, within 30 days of purchase, there is an option to purchase an Extended Service Plan that offers savings on new appliance plans, available in the United States and Canada.
Key Points:
- F20 on a washer means there is a water inlet problem.
- It indicates that there is either no water or insufficient water supply reaching the washer.
- To resolve the issue, you can press PAUSE/CANCEL twice to cancel the current cycle and unplug the washer.
- Check if both hot and cold water faucets are fully turned on and inspect the inlet hose connection for any clogs.
- Ensure that the water inlet hoses are not kinked or frozen.
- If the problem persists, call for service.
Did You Know?
1. The “F20” error code on a washer typically refers to a water supply issue, indicating a problem with the filling of water into the machine.
2. F20 may also denote a faulty flow meter on some washers, which measures the amount of water entering the appliance.
3. In certain washer models, F20 can be an indicator of a clogged or kinked water inlet valve hose, obstructing the water flow.
4. Interestingly, “F20” is not universally used across all washer brands, as different manufacturers may assign unique error codes to signify similar issues.
5. Some washers may display F20 when the machine detects a malfunction in the pressure switch, a component responsible for monitoring water levels during the wash cycle.
F20 Error Code And Water Inlet Problem
When you see the F20 error code on your washer, it indicates a water inlet problem. This means that your washer is not receiving the required amount of water or is not receiving any water at all. This can be caused by various issues such as:
- A clogged inlet hose
- Insufficient water supply
- Kinked or frozen water inlet hoses
To resolve this issue, you will need to perform a series of troubleshooting steps to identify and fix the underlying problem.
Insufficient Water Supply
One possible reason for the F20 error code is an insufficient water supply. To check if this is the case, make sure that both the hot and cold water faucets are fully turned on. Often, people forget to open one of the faucets which results in the lack of water flow into the washer.
Additionally, you should inspect the inlet hose connection to the washer for any clogs. Over time, debris can accumulate in the screens of the connection, limiting the water flow. Clean the screens if necessary to ensure a steady water supply to your washer.
Cancelling The Current Cycle
To cancel the current cycle and clear the F20 error code, you need to follow a specific procedure.
-
Press the PAUSE/CANCEL button twice to stop the washer. This will reset the current cycle and allow you to begin the troubleshooting process.
-
Unplug the washer from the power source or disconnect the power supply temporarily to reset the control board. This step is crucial to clear any temporary glitches or errors in the system.
Remember to follow these steps in order to effectively resolve the F20 error code.
Disconnection Of Power Supply
After cancelling the current cycle, it is necessary to disconnect the power supply. This ensures that the washer is completely reset before proceeding with the troubleshooting. Unplug the washer from the electrical outlet or turn off the circuit breaker associated with the washer. Wait for a few minutes to allow the control board to fully reset. After the waiting period, plug the washer back in or turn on the power supply before continuing with the following steps.
Turning On Hot And Cold Water Faucets
Once the power supply is reestablished, it is important to check if both the hot and cold water faucets are fully turned on. It is possible that one of the faucets may have been accidentally closed, leading to an F20 error code. To avoid this, ensure that both faucets are fully open to allow a sufficient water supply to the washer. This simple step can often solve the problem without any further troubleshooting.
- Make sure both hot and cold water faucets are turned on.
- Check for the F20 error code.
- Ensure a sufficient water supply to the washer.
- Troubleshooting may not be necessary.
Remember to fully open both faucets to avoid any issues with water supply.
Checking For Clogs At Inlet Hose Connection
Another common cause of the F20 error code is a clog in the inlet hose connection to the washer. Inspect the screens at the connection point for any signs of debris or clogs. Over time, dirt, sediment, or other particles can accumulate in the screens, reducing or blocking the water flow. If you find any clogs, clean the screens thoroughly to remove the debris. After cleaning, reconnect the inlet hoses securely and ensure they are not kinked or twisted.
Encountering the F20 error code on your washer can be frustrating, but with the troubleshooting tips provided, you should be able to identify and fix the problem. Remember to check the water supply, clean any clogs, and ensure a secure connection of the inlet hoses. If the problem persists, contact a professional service technician for assistance. Don’t forget that you have the option to purchase an Extended Service Plan within 30 days of your purchase, which can provide additional savings on appliance repairs and maintenance in the future.
Check this out:
Frequently Asked Questions
How do I fix F20 error code on my washing machine?
To fix the F20 error code on your washing machine, start by checking if both the faucets supplying water to the washer are fully open. Sometimes, adjusting the water flow can resolve the issue. Additionally, ensure that your home is receiving an adequate water supply with no water supply issues in your area. If the water pressure is low, this could also trigger the F20 error code, so you might want to investigate and address any water pressure problems.
What does F20 mean?
The F20 code is a water supply error message that alerts you to a problem with your water supply. This error code typically indicates that both the hot and cold water connections are not properly connected or turned on. It is important to ensure that both the hot and cold water taps are fully open and connected to the correct water inlets. When facing an F20 error, make sure to check the water supply connections to resolve the issue and resume the normal functioning of your appliance.
What does E20 mean on washer?
When you see the code E20 on your washer, it means that there is a draining issue with the machine. This error code indicates that there might be a blockage in the drainage system, preventing the water from being properly drained. To resolve this issue, you can follow the suggested steps provided, and if you need to move the washer, remember to level it afterwards to ensure proper functioning.
How do I reset my washer after error code?
To reset your washer after an error code, start by turning off the machine at the powerpoint and waiting for one minute. Then, turn it back on and observe if the error code clears. If not, you can attempt a Master Reset, which is commonly employed by appliance technicians. For this, open and close the door of the washing machine six times within 12 seconds. This action should reset all the onboard componentry and may solve the issue you are experiencing.