What Does OE Mean on LG Washer: Troubleshooting Guide

What Does Oe Mean on Lg Washer?

The “OE” error code on an LG washer indicates a drainage issue.

This means that there is a problem with the draining process, preventing the water from being expelled from the machine as it should.

To resolve this issue, you can perform a series of troubleshooting steps.

First, check for kinks or clogs in the drain hose and ensure it is properly connected.

Run a spin cycle to see if the problem persists.

Listen for a humming sound to confirm if the drain pump motor is functioning.

Clean the drain pump filter using warm water and a soft-bristle brush.

Avoid washing the pump filter in a dishwasher.

Instructions are provided on removing and reattaching the drain hose, as well as draining excess water from the wash tub.

Open the service panel to check for potential clogs in the filter.

Running a tub clean cycle can also help resolve the error code.

Excessive suds may be causing the issue, so be sure to use the appropriate amount of detergent.

If the problem persists, contact LG customer service for further assistance.

Key Points:

  • “OE” error code indicates a drainage issue on LG washer
  • Troubleshooting steps:
  • Check for kinks or clogs in the drain hose and ensure proper connection
  • Run a spin cycle to test if the problem persists
  • Listen for a humming sound to check if the drain pump motor is functioning
  • Clean the drain pump filter using warm water and a soft-bristle brush
  • Do not wash the pump filter in a dishwasher
  • Open the service panel to check for potential clogs in the filter
  • Running a tub clean cycle can help resolve the error code
  • Excessive suds may be causing the issue, use the appropriate amount of detergent
  • If problem persists, contact LG customer service for assistance

Did You Know?

1. The “OE” error code on an LG washer stands for “Outlet Error.” It indicates that there is an issue with the drainage system of the machine, such as a clogged drain hose or a problem with the pump.

2. Interestingly, the abbreviation “OE” in the context of a washer error code has nothing to do with the traditional meaning of “OE” as “Operating Expense.” It is solely used to diagnose drainage-related issues in LG washing machines.

3. LG washers often have a built-in feature called the “Debris Filter” that helps prevent clogs and improves drainage efficiency. Regularly cleaning the debris filter can help avoid the “OE” error code and keep your machine running smoothly.

Related Post:  What Is Fresh Care on LG Washer: An Indepth Guide to Revolutionary Clothing Maintenance

4. If you see the “OE” error code on your LG washer, it is recommended to check for any kinks or blockages in the drain hose first. Sometimes a simple adjustment or removal of an obstruction can resolve the issue and clear the error code.

5. The “OE” error code can also be triggered by overloading the washing machine with excessive laundry. It is always advised to follow the manufacturer’s guidelines regarding the maximum load capacity to prevent this error and prolong the life of your LG washer.

Check For Kinks Or Clogs In The Drain Hose

One of the most common reasons for the “OE” error code on an LG washer is a kink or clog in the drain hose. To check for this issue, follow these steps:

  1. Unplug the washer and turn off the water supply.
  2. Locate the drain hose at the back of the washer and inspect it for any kinks or bends.
    • Straighten out any kinks to ensure proper water flow.
  3. If there are no visible kinks, disconnect the drain hose from the washer and place it in a bucket or sink.
  4. Slowly open the drain hose and check for any debris or foreign objects that might be blocking the flow.
    • Use a long, flexible brush or a plumbing snake to carefully remove any clogs found.
  5. Once the drain hose is free from kinks and clogs, reattach it securely to the washer.
    • Make sure the drain hose is inserted into the drain or standpipe at least 6 inches to prevent water leakage.

Following these steps should help resolve the “OE” error code if it was caused by a drain hose issue.

Run Spin Cycle To Confirm Issue Is Resolved

After checking and fixing any potential issues with the drain hose, the next troubleshooting step is to run a spin cycle. Select a spin cycle on the washer’s control panel and start the machine. Observe if the spin cycle completes without displaying the “OE” error code. If the code does not reappear, it signifies that the issue has been resolved and the washer is now functioning properly.

If the “OE” error code still appears during the spin cycle, it indicates that the problem lies elsewhere and further troubleshooting is required.

Related Post:  How Do I Force My GE Washer to Drain and Troubleshoot Common Issues

Listen For Humming Sound From Drain Pump Motor

The drain pump motor is essential for removing water from the washer. If the motor is not working correctly, it can result in the “OE” error code. To determine whether the drain pump motor is functioning, follow these steps:

  1. Place your ear near the washer’s bottom while running a cycle.
  2. Listen for a humming sound which indicates that the motor is receiving power and attempting to pump out the water.

If there is no humming sound or any indication of the motor working, it may be necessary to replace the drain pump motor. Consult the LG washer’s manual or contact LG customer service for guidance on how to replace the motor.

Note: Pay attention to the specific instructions provided in the manual or by LG customer service.

Clean Drain Pump Filter Using Warm Water And Brush

An accumulation of debris and lint in the drain pump filter can cause the “OE” error code. It is important to regularly clean the filter to maintain proper water drainage.

To clean the drain pump filter, follow these steps:

  1. Locate the filter behind a small access panel on the front or bottom of the washer.
  2. Carefully open the access panel and remove the filter.
  3. Rinse the filter under warm water to remove any dirt or residue.
  4. Use a soft-bristle brush to gently scrub the filter and remove any stubborn debris.
  5. Once clean, reinsert the filter and securely close the access panel.

Please note: Washing the drain pump filter in a dishwasher is not recommended, as it may cause damage to the filter or dishwasher.

Avoid Washing Pump Filter In Dishwasher

While it may be tempting to clean the drain pump filter in a dishwasher, it is strongly advised against doing so. Dishwashers use high-pressure water and detergents that can potentially damage the filter. Instead, follow the steps mentioned earlier to clean the drain pump filter manually using warm water and a soft-bristle brush.

Remove And Reattach Drain Hose

If the “OE” error code persists after checking the drain hose for kinks or clogs, it may be necessary to remove and reattach the hose. Start by disconnecting the drain hose from the washer and carefully inspect it for any signs of damage or obstructions. If any issues are found, replace the drain hose with a new one.

Related Post:  How Long Is a Delicate Wash Cycle on Average?

If the drain hose appears to be in good condition, reattach it securely to the washer and ensure that it is properly inserted into the drain or standpipe. A loose or improperly attached drain hose can cause drainage issues and trigger the “OE” error code.

After reattaching the drain hose, run a cycle to test if the error code has been resolved. If the code still persists, further troubleshooting or professional assistance may be required.


Check this out:


Frequently Asked Questions

What does OE mean on a LG top load washer?

OE on a LG top load washer stands for “Overflow Error,” signaling a problem with water drainage. When this error code appears, it means that the washer has been unable to drain water within a span of 13 minutes. This could indicate a clog in the drainage system or a malfunctioning drain pump, preventing water from being properly removed from the machine. Resolving this error code requires troubleshooting the drainage mechanism and ensuring unobstructed water flow, allowing the washer to function optimally.

How do I reset my OE?

If you are experiencing the persistent OE error code, you can try resetting your OE by power cycling your washer. To do this, simply disconnect the washer from the power source for about 30 seconds and then reconnect it. Once you have reset the washer, run a test cycle to check if the error code has been resolved.

What is the meaning of OE in automatic washing machine?

The abbreviation OE in an automatic washing machine refers to the error code that indicates a drainage issue. This error occurs when water is unable to drain from the washing machine, typically due to a clogged filter or drain pump. Regular maintenance and cleaning of the filter are crucial to prevent the accumulation of laundry residue and ensure proper functioning of the machine.

How do you fix a clogged washing machine drain?

One way to fix a clogged washing machine drain is to use the power of hot water. Start by boiling at least a gallon of water, and then unplug the washing machine to ensure safety. To avoid any mess, place a funnel over the pipe opening and slowly pour the boiled water into the drain. This hot water can help loosen and dissolve the clog, allowing the water to flow freely once again.

References: 1, 2, 3, 4