What Does Sud Mean on LG Washer and How to Resolve It?
What Does Sud Mean on Lg Washer?
“SUD” on an LG washer display indicates that the cycle has been paused and the clothes should be redistributed to ensure even balance.
This can be caused by a mixed load or a small load.
Key Points:
- “SUD” on an LG washer display means cycle pause, requiring redistributing clothes for even balance.
- A mixed load or a small load can cause the “SUD” message.
- The cycle is paused to prevent damage to the washer or clothes.
- Even distribution of clothes helps improve the wash quality.
- This message indicates the need to adjust the load for better performance.
- The “SUD” message is specific to LG washers and does not indicate an error.
Did You Know?
1. Sud stands for “suds” in the context of an LG washer, indicating that there are too many bubbles or foam in the machine during the wash cycle.
2. Excessive suds can occur if too much detergent is used or if the wrong type of detergent is used in an LG washer.
3. Sud errors are not uncommon in LG washers, as they are designed to detect and prevent over-sudsing for optimal cleaning performance.
4. To resolve a Sud error on an LG washer, it is recommended to cancel the cycle, drain the washer, and then rewash the load with a smaller amount of detergent.
5. In some cases, a Sud error on an LG washer can also be caused by a clogged drain pump filter, which can be easily cleaned to resolve the issue.
De1 Error Code: Sidekick Drawer Not Closed Properly
The dE1 error code on an LG washer indicates that the sidekick drawer, typically used for additional washing or to hold small items, is not closed properly.
To resolve this issue, you will need to ensure that the drawer is fully closed and locked. This can be done by pushing the drawer in until you hear a click, indicating that it is securely closed. Once the drawer is closed and locked, the washer will automatically start the cycle.
If you continue to experience the dE1 error code even after closing the drawer, it is possible that there may be an issue with the locking mechanism. In this case, it is recommended to turn off the washer, hold the drawer open, and then restart the cycle. Once the cycle has started, firmly close the drawer to ensure that it locks properly.
This should resolve the dE1 error code and allow the washer to operate normally.
De2 Error Code: Drawer Not Locked Properly
The dE2 error code on an LG washer indicates that the sidekick drawer is closed but not locked properly. This can occur if the drawer is not firmly closed or if there is an issue with the locking mechanism.
To resolve this error code, you will first need to turn off the washer. Once the washer is turned off, open the sidekick drawer and ensure that it is completely empty and free from any obstructions.
After confirming that the drawer is empty, restart the cycle and hold the drawer open. While holding the drawer open, close it firmly to ensure that it locks into place. This should resolve the dE2 error code and allow the washer to continue operating normally.
De3 Error Code: Lid Not Properly Latched
The dE3 error code on an LG washer appears when the lid is not properly latched. This error code is typically seen on models with a top-loading lid.
To resolve this issue, follow these steps:
- Turn off the washer.
- Open the sidekick drawer and check if there are any debris or obstructions in the latch area.
- Clear any obstacles that may be preventing the lid from properly latching.
- Once cleared, close the lid securely and shut the drawer.
After closing the lid and shutting the drawer, restart the cycle and see if the dE3 error code is resolved.
If the error persists, it is possible that there may be an issue with the latch mechanism. In this case, it is best to contact LG customer support or a qualified technician for further assistance.
Ie Error Code: Water Supply Problem
The IE error code on an LG washer indicates a problem with the water supply. This can be caused by a variety of issues, such as clogged inlet filters, partially closed water faucets, or kinks in the hoses.
To resolve this error code, start by checking and cleaning the inlet filters. These filters can become clogged with debris over time, hindering the water supply to the washer.
Next, ensure that the water faucets connected to the washer are fully open. Partially closed faucets can restrict the water flow and trigger the IE error code. Additionally, check the hoses for any kinks or pinches that may be obstructing the water supply. Straighten out any kinks or reposition the hoses to ensure a free flow of water.
If none of these solutions resolve the IE error code, it is recommended to contact LG customer support for further assistance. They may be able to provide additional troubleshooting steps or recommend a service technician if necessary.
Oe Error Code: Drain Hose Issue
The OE error code on an LG washer indicates a problem with the drain hose. This error code can be triggered by various issues, such as clogs, kinks, or pinches in the drain hose. It is important to ensure that the drain hose is not more than 53 inches above the floor, as this can cause drainage problems.
To resolve the OE error code, follow these steps:
- Check for clogs or obstructions in the drain hose. Clear any debris that may be blocking the flow of water.
- Inspect the drain hose for kinks or pinches. Straighten out any kinks and ensure that the drain hose is properly positioned to allow for a seamless flow of water.
If the washer is full of water and needs to be drained:
- Select the rinse and spin cycle to initiate the draining process.
- Alternatively, you can also manually drain the water by pulling the drain tube located on the inner left side of the drawer.
It’s important to address the OE error code promptly to avoid further issues with the washer’s drainage system.
Ue Error Code: Unbalanced Load Issue
The UE error code on an LG washer indicates that the washer has attempted to adjust an unbalanced load before going into the spin cycle. If the washer is unable to successfully balance the load, the UE error code will be displayed. To resolve this issue, it is important to redistribute the clothes in the washer to ensure an even balance.
If you encounter the UE error code, open the washer and redistribute the clothes. Ensure that the load is evenly distributed and that there are no heavy items or bunches of clothes on one side. Once the clothes have been properly rearranged, close the washer and restart the cycle.
If the UE error code continues to appear even after redistributing the clothes, it is possible that there may be an issue with the washer’s suspension or leveling. In this case, it is recommended to contact LG customer support or a qualified technician for further assistance.
Sud On Display: Cycle Paused, Clothes Need Redistribution
If you see the word “SUD” displayed on your LG washer, it indicates that the cycle has been paused due to excessive suds. Excessive suds can occur when too much laundry detergent is used or when the wrong type of detergent is used. It can also be caused by a mixed load or a small load.
To resolve this issue, first, ensure that you are using the correct type and amount of detergent for your specific washer model. Follow the manufacturer’s guidelines for detergent usage. If you are using a high-efficiency (HE) washer, be sure to use HE detergent.
If you have used too much detergent, run an additional rinse cycle to remove excess suds. If the load is mixed or small, redistribute the clothes to ensure an even balance and reduce suds formation. After taking these steps, you can resume the cycle, and the washer will continue its operation.
Tcl Code: Time To Run Tub Clean Cycle
If you see the TCL code displayed on your LG washer, it is an indication that it is time to run the tub clean cycle. The tub clean cycle is designed to remove any buildup or residue that may accumulate inside the washer, leading to odors or mold growth.
To run the tub clean cycle, start by diluting 1/4 cup of bleach in a quart of water. Add this mixture to the detergent dispenser or directly into the wash drum. Alternatively, you can use commercial tub cleaning agents specifically designed for washing machines.
Select the tub clean cycle on your washer and let it run its course. Once the cycle is complete, wipe down the interior of the washer with a clean cloth to remove any remaining residue.
Running the tub clean cycle periodically, typically every 30 to 60 days, will help maintain the cleanliness and efficiency of your LG washer.
E7 Error Code: Improper Installation Of Sidekick Washer
If you encounter the E7 error code on your LG washer, it indicates that the Sidekick washer, a secondary washing unit that can be installed underneath an LG front load washer, has not been properly installed. The E7 error code is specific to the installation of the Sidekick unit.
To resolve this issue, it is important to carefully follow the installation instructions provided by LG. Ensure that the Sidekick unit is correctly positioned and secured underneath the front load washer. The Sidekick unit should not be used by itself or installed under a dryer.
If you are unsure of the installation process or continue to experience the E7 error code after proper installation, it is recommended to contact LG customer support or a qualified technician for further assistance. They will be able to provide guidance and resolve any installation issues.
Check this out:
https://www.youtube.com/watch?v=PDJqYvbo8p8
Frequently Asked Questions
How do I get rid of suds on my LG front load washer?
To effectively remove suds on your LG front load washer, try running the washer on a rinse cycle. Simply select the “Rinse” setting and run an empty cycle to eliminate any excess detergent residue. This method not only helps get rid of suds but also prevents the Sud error from happening in the future. By allowing the washer to rinse thoroughly, you can ensure a clean and sud-free washing experience.
How long is the Sud cycle on my LG washer?
The Sud cycle on your LG washer typically runs for a duration of two hours. This cycle is specifically designed to reduce excessive soap suds in the drum caused by using too much or low-quality detergent. When the washer detects an overload of suds during the cycle, it activates the Sud cycle to effectively eliminate the suds within a reasonable time frame.
Why does my washing machine keep saying Sud?
If your washing machine keeps displaying the Sud error code, it is likely detecting an excessive amount of suds during the wash cycle. This can happen when too much detergent is used, causing an excessive amount of suds to form. To resolve the issue, make sure to carefully measure the correct amount of detergent for each load and avoid using too much. Additionally, consider using a detergent specifically designed for high-efficiency washing machines, as they produce fewer suds.
What is Sud setting on washing machine?
The Sud setting on a washing machine is designed to address excessive suds during the washing process. When the washer detects too many suds, it automatically extends the rinse time to ensure all the suds are removed effectively. This pause in the washing cycle allows the excess bubbles to break and additional water is added to aid in rinsing. Ultimately, the Sud setting helps prevent any residue or leftover suds from lingering on the clothes after the wash is complete.