What Is Mastic Adhesive? Mastic adhesive is an adhesive commonly used in construction projects to stick tiles to surfaces before grouting. It has strong adhesive properties and can be used on various substrata such as concrete, cement board, and interior drywall. However, it is not recommended for high moisture areas like shower floors or swimming…
Can a Shower and Sink Share a Drain? Yes, a shower and sink can share a drain. By changing out the sink drain pipe and connecting it to the shower drain with Y-connectors, the two fixtures can share the same drainage system. Factors such as distance between fixtures, floor slope, initial pipe planning, and pipe…
Can Scorpions Come Up Through Drains? Yes, scorpions can come up through drains. They have the ability to crawl up plumbing systems and enter homes through small cracks. Although they do not live in drains, scorpions can fall into them from time to time. Slick surfaces like tubs and sinks do not provide enough friction…
What Kind of Bugs Live in Couches? There are several types of bugs that can live in couches, including bed bugs, carpet beetles, and fleas. Signs of bed bugs may include small reddish-brown fecal spots, bites on the arms and legs, bed bug molt skins, eggs, empty eggshells, and the bugs themselves. Signs of carpet…
What Type of Caulk for Toilet Base? For caulking the toilet base, it is recommended to use a silicone-based caulk due to its waterproofing capabilities. Key Points: Recommended to use silicone-based caulk for caulking toilet base Silicone caulk is preferred for its waterproofing capabilities Silicone caulk helps to prevent leaks and damages from water Silicone…
How to Get Wax Out of a Blanket? To get wax out of a blanket, start by freezing the wax and then scrape it off using a blunt object. Afterward, soak the affected area in warm water for at least an hour before machine washing the blanket. Be sure to check the care labels for…
How Long Does Drylok Take to Dry? Drylok takes approximately 24 hours to dry before it can be painted over with a good quality latex top coat. Key Points: Drylok takes about 24 hours to dry completely. It must be completely dry before being painted over. A good quality latex top coat is recommended for…
What Happens When an Expansion Tank Fails? When an expansion tank fails, several issues can arise. Leaks may occur at pipe fittings, the drain valve, or the tank itself. Tightening loose fittings or valves can usually resolve these leaks, but if water is leaking from the tank itself, a professional should be consulted. Another common…
How to Clean Hats With Borax? To clean hats with borax, you will need to create a cleaning solution by mixing water with a teaspoon of borax for light stains or a tablespoon for heavy stains. Test the solution on a small patch of the hat first to avoid damage. Soak the hat in the…
How Long Let Grout Dry Before Sponging? To ensure proper drying and a solid bond, it is recommended to let grout dry for approximately 15 to 30 minutes before sponging. Mixing the grout properly is crucial to its drying time and overall performance. Dissolve all grout powder completely in water using a margin trowel, rolling…
Is Borax Safe for Septic? Yes, borax is safe for septic systems if used in appropriate amounts. It can be used as a bleach alternative, a disinfectant for surfaces, a rust remover, and for unclogging drains. Borax is septic-safe and will not cause damage to septic tanks. Additionally, borax can be mixed with other products…
What to Do With Old Tupperware? When it comes to old Tupperware, it is important to consider the potential health risks associated with BPA, a harmful chemical commonly used in older Tupperware containers. As the Tupperware brand did not eliminate BPA until 2010, it is reasonable to assume that older Tupperware is not BPA safe….
Where Is Ethan Allen Furniture Made? Ethan Allen furniture is primarily made in North America, with approximately 75% of its products being manufactured on the continent. The company operates ten manufacturing facilities, seven of which are located in the United States, two in Mexico, and one in Honduras. The headquarters of Ethan Allen is in…
How to Load a Caulk Gun? To load a caulk gun, first, remove the rod that holds the plunger. Then, insert a new tube of caulk into the barrel of the gun, making sure the nozzle is facing towards the front. Release the rod and push it until it touches the back of the tube….
What Size Drain Pipe for Washing Machine? The size of drain pipe required for a washing machine is typically 1-1/2 inches in diameter. This allows for proper drainage of the water from the machine. It is important to ensure that the drain pipe is connected securely to prevent leaks or blockages. It is recommended to…