How to Change Filter on Shark Lift Away Vacuum: Step-by-Step Guide
How to Change Filter on Shark Lift Away?
To change the filter on a Shark Lift Away, follow these steps.
First, remove the filters from the vacuum.
Then, check for any obstructions and clear them if necessary.
Next, empty and clean the dirt canister.
After that, clean the filters themselves.
Lastly, don’t forget to clean the rotating brush head.
These steps will ensure that your Shark Lift Away vacuum continues to function effectively.
Key Points:
- Remove the filters from the Shark Lift Away vacuum
- Check for and clear any obstructions
- Empty and clean the dirt canister
- Clean the filters
- Clean the rotating brush head
- Following these steps will maintain the effectiveness of your Shark Lift Away vacuum.
Did You Know?
1. Did you know that Shark Lift Away filters are made from HEPA (High-Efficiency Particulate Air) material? This type of filter can capture up to 99.97% of particles as tiny as 0.3 microns, ensuring cleaner air in your home.
2. The Shark Lift Away vacuum cleaner uses a washable foam filter and a HEPA filter. Both filters need regular cleaning to maintain optimal performance. Cleaning the filters every 3-6 months is recommended, depending on usage.
3. To change the filter on a Shark Lift Away vacuum, locate the filter cover on the back of the main canister. Remove the cover by unclipping or twisting it, depending on the model. Take out the old filter and replace it with a new one, ensuring it is placed correctly. Finally, secure the filter cover back in place.
4. One interesting feature of the Shark Lift Away vacuum is the option to switch between a powered brush roll for carpets and a gentler brush roll for hard floors. This versatility allows you to efficiently clean different surfaces without causing damage.
5. The Shark Lift Away vacuum cleaner is equipped with a swivel steering mechanism that makes it easier to maneuver around furniture and tight spaces. This design feature allows for greater flexibility and control, enhancing the overall cleaning experience.
Step 1: Remove The Filters
Changing the filters on your Shark Lift Away Vacuum is an important part of regular maintenance. Over time, the filters can become clogged with dirt and debris, which can affect the vacuum’s performance. Follow these steps to remove the filters:
- Locate the filter housing. Depending on the model of your Shark Lift Away Vacuum, the filter housing may be located on the side or top of the vacuum.
- Open the filter housing. This can usually be done by pressing a release button or unlocking mechanism. Refer to your vacuum’s user manual for specific instructions on how to open the filter housing.
- Remove the filters. There may be multiple filters in the housing, including a foam filter and a felt filter. Carefully lift out each filter, taking note of their position for reassembly later.
-
Inspect the filters. Check for any signs of damage or excessive dirt buildup. If the filters are damaged or extremely dirty, it is recommended to replace them with new ones.
-
Regular maintenance of your Shark Lift Away Vacuum involves changing the filters.
- The filter housing can be located on the side or top of the vacuum, depending on the model.
- Opening the filter housing can be done using a release button or unlocking mechanism.
- Take note of the position of each filter before removing them for reassembly.
- Inspect the filters for any damage or excessive dirt buildup.
- Replace the filters with new ones if they are damaged or excessively dirty.
“Changing the filters on your Shark Lift Away Vacuum is an important part of regular maintenance.”
Step 2: Check For And Clear Obstructions
Before reinstalling the filters in your Shark Lift Away Vacuum, it is crucial to check for any obstructions that may be blocking the airflow. Follow these steps:
2.1. Turn off and unplug the vacuum. Safety should always be a priority when performing maintenance tasks on electrical appliances.
2.2. Carefully examine the brush roll and brush head for tangled hair, string, or other debris. Use a pair of scissors or a cleaning tool to remove any obstructions that may affect the vacuum’s performance.
2.3. Inspect the hose and attachments for blockages. Detach the hose and visually examine it for clogs. If any blockages are found, gently remove them using a long, flexible object, such as a broom handle or a vacuum hose attachment.
2.4. Reattach the hose and any other detachable parts. Ensure that all parts are securely connected before proceeding to the next step.
Step 3: Empty And Clean The Dirt Canister
Now that you have removed any obstructions, it’s time to empty and clean the dirt canister of your Shark Lift Away Vacuum. Follow these steps:
-
3.1. Remove the dirt canister from the vacuum. Most Shark Lift Away Vacuums have a latch or release button that allows you to easily remove the canister.
-
3.2. Empty the dirt canister into a trash bag or bin. Be careful not to breathe in the dust and debris as you empty the canister.
-
3.3. Rinse the canister with water. Use warm soapy water to thoroughly clean the inside of the canister. Pay special attention to any stubborn dirt or stains and use a brush or sponge to scrub them away.
-
3.4. Allow the canister to dry completely before reattaching it to the vacuum. This will prevent any moisture from damaging the vacuum’s motor.
Step 4: Shark Vacuum Filter Cleaning
Now that the filters have been removed, it’s time to clean them. Follow these steps to ensure your filters are thoroughly cleaned:
4.1. Fill a sink or basin with warm water and a mild detergent. Avoid using harsh chemicals or bleach, as they can damage the filters.
4.2. Submerge the filters in the soapy water. Gently agitate them to dislodge any dirt or debris that may be trapped.
4.3. Rinse the filters with clean water to remove any remaining soap residue.
4.4. Squeeze out excess water from the filters. Be careful not to wring or twist the filters too hard, as this may damage their structure.
4.5. Allow the filters to air dry completely before reinstalling them in the vacuum. Do not use the vacuum with wet filters, as this can damage the motor.
- Make sure to fill a sink or basin with warm water and a mild detergent.
- Avoid using harsh chemicals or bleach to prevent damage to the filters.
- Gently agitate the filters in the soapy water to dislodge dirt and debris.
- Rinse the filters with clean water to remove any soap residue.
- Carefully squeeze out excess water from the filters without wringing or twisting them too hard.
- Allow the filters to air dry completely before putting them back in the vacuum.
Keep in mind that wet filters should not be used with the vacuum as it can harm the motor.
Step 5: Clean The Rotating Brush Head
The rotating brush head of your Shark Lift Away Vacuum can easily accumulate hair, lint, and other debris. Regular cleaning of the brush head will help to maintain optimal performance. Here’s how:
-
Disable the brush roll: Depending on your model, there may be a switch or button that allows you to turn off the brush roll. Refer to your vacuum’s user manual for instructions on how to do this.
-
Use scissors or a cleaning tool to cut or remove any hair, string, or debris wrapped around the brush roll. Be careful not to damage the bristles or brush roll while doing so.
-
Remove the brush roll for thorough cleaning. This can usually be done by pressing a release button or unlocking mechanism. Refer to your vacuum’s user manual for specific instructions.
-
Clean the brush roll using warm soapy water. Use a brush or sponge to scrub away any stubborn dirt or stains.
-
Rinse the brush roll with clean water and allow it to air dry completely before reassembling it back into the vacuum.
By following these step-by-step instructions, you can easily change the filter on your Shark Lift Away Vacuum. Regular maintenance and cleaning of the filters and other components will help to ensure your vacuum continues to perform at its best.
Check this out:
Frequently Asked Questions
Where are the filters on a Shark powered lift away?
The filters on a Shark powered lift away can be found behind the filter grill (door) on the lower front part of the machine. By firmly pulling off the door, the HEPA filter will be revealed and can be easily taken out. The HEPA filter plays a crucial role in trapping small particles and allergens, ensuring cleaner and healthier air in your home.
How many filters does a Shark Lift Away have?
The Shark Lift Away vacuum features three filters that play a crucial role in maintaining its optimal performance. Firstly, the foam and felt filter require cleaning every three months to ensure the vacuum’s efficiency. These filters contribute to the overall filtration process by capturing debris and preventing it from clogging the vacuum. The second filter is the HEPA filter, which helps trap dust and allergens within the vacuum. It is recommended to clean the HEPA filter at least once a year to maintain its effectiveness in providing a cleaner environment.
Do I need to replace my Shark vacuum filter?
Replacing your Shark vacuum filter on a regular basis is crucial for optimal performance. Neglecting to change the foam/felt filter every 3 months and the HEPA filter every 6 months can result in a loss of suction and reduced cleaning efficiency. However, with our set of washable and reusable replacement filters specifically designed for the Shark Navigator Lift-Away, you can save money and maintain maximum suction power. By regularly cleaning and reusing these filters, you can ensure a longer lifespan for your vacuum and continue to enjoy efficient and effective cleaning.
How often should I change the filter on a Shark Lift Away vacuum?
The frequency of changing the filter on a Shark Lift Away vacuum depends on the usage and the type of filter being used. Generally, it is recommended to clean or replace the filter every three to six months. However, if you have pets or if you use the vacuum frequently, you may need to clean or replace the filter more often, perhaps every two to three months. It is crucial to inspect the filter regularly and look for signs of dirt or blockage to ensure optimal performance and suction power of the vacuum cleaner.