How to Drain Speed Queen Washer: A Step-by-Step Guide to Maintaining your Appliance
How to Drain Speed Queen Washer?
To drain a Speed Queen washer, you can manually drain the water by loosening the drain hose.
If the water won’t come out, check for blockages and use a plumbing snake to remove any debris.
Also, inspect the drain hose for any kinks and straighten them out if necessary.
Accumulated dirt, debris, or lint between the basket and tub may prevent drainage and may require a technician’s assistance.
A clogged or faulty drain pump can also hinder water extraction and may need cleaning or replacement.
Excessive soap suds from using too much detergent can obstruct water flow, and a defective lid switch assembly can cause drainage issues.
Key Points:
- Manually drain the water by loosening the drain hose
- Check for blockages and use a plumbing snake to remove debris
- Straighten any kinks in the drain hose
- Get a technician’s help if dirt, debris, or lint is preventing drainage
- Clean or replace a clogged or faulty drain pump
- Be cautious of excessive soap suds and check for a defective lid switch assembly.
Did You Know?
1. Did you know that Speed Queen washers have a unique feature called a “drain button” hidden beneath the control panel? Pressing and holding this button for a few seconds will initiate the draining process, allowing you to quickly and easily empty the washer.
2. Many people are unaware that Speed Queen washers have a built-in lint trap that needs regular cleaning. Located near the agitator or in some models, near the drain pump, this small but important component captures lint and debris, preventing it from clogging the drain or damaging the machine.
3. When draining your Speed Queen washer, it’s beneficial to keep a small bucket or container handy. This is not only helpful in catching any excess water that may spill out during the draining process, but it can also be used to inspect the water for any unusual debris or signs of potential mechanical issues.
4. Did you know that the drain hose on a Speed Queen washer is typically transparent? This design element allows you to visually check the water flow during draining, ensuring that the water is efficiently moving out of the machine and preventing any blockages.
5. Speed Queen washers are known for their durability and long life span. As a fun fact, the Speed Queen Classic (a model released in 2013) boasts an impressive lifespan of 25 years when used for typical household laundry needs. So, if maintained well, your Speed Queen washer can easily become a reliable companion for a quarter of a century!
General Instructions For Draining A Speed Queen Washer
To ensure effective cleaning of your clothes, it is crucial to maintain the proper drainage of your Speed Queen washer. If you are experiencing improper drainage, follow these instructions to drain the machine:
1. Start by unplugging the washer from the power source for safety.
2. Locate the access panel at the bottom of the front-loading washer. This panel provides easy access to the drain hose.
3. Carefully remove the cap at the end of the drain hose. Take caution not to damage the hose during this process.
4. Place a shallow pan or bucket below the hose to catch the water that will flow out.
5. Tilt the hose downward to allow the water to flow out. If needed, gently squeeze the hose to help start the flow. Avoid any actions that could damage the hose or create leaks.
6. After the water has completely drained, inspect the drain hose for any blockages or kinks that might hinder proper drainage. Remove any obstructions or straighten kinks with care.
7. For overall cleanliness, it is advisable to clean the filter. Rinse it with running water and gently scrub it using a soft-bristled brush or microfiber cloth.
8. Finally, replace the cap at the end of the drain hose and ensure it is tightly secured.
These steps will help ensure the efficient functioning of your Speed Queen washer.
Different Drainage Options For Front-Load Washers
Front-load washers can have different drainage options depending on the model. Some washers have a drain hose, while others have a drain pump filter. It is important to understand the different options available to effectively drain your Speed Queen washer.
If your washer has a drain hose, follow the general instructions provided above to manually drain the machine. However, if your washer has a drain pump filter, the process is slightly different. Here are the steps to follow:
- First, unplug the washer from the power source.
- Open the access panel located at the front of the washer, typically at the bottom.
- Locate the drain pump filter, which is typically a round or rectangular cover that can be unscrewed or snapped off.
- Place a shallow pan or bucket beneath the drain pump filter to catch any water that may come out.
- Carefully unscrew or unclip the filter cover. Be prepared for water to flow out once the cover is removed.
- Allow the water to drain into the pan or bucket. Depending on the amount of water in the machine, this may take some time.
- Once the water has completely drained, clean the filter by rinsing it with running water and scrubbing it with a soft-bristled brush or a microfiber cloth. Make sure all debris is removed from the filter.
- Reattach the filter cover and ensure it is securely fastened.
‒ Ensure the washer is unplugged before starting the process.
‒ Place a pan or bucket to collect any draining water.
‒ Clean the filter thoroughly to remove debris.
–Make sure to unplug the washer before starting.
–Place a pan or bucket beneath the filter to catch water.
–Clean the filter well to remove debris.
–Remember to reattach the cover securely.
“If your washer has a drain hose, follow the general instructions provided above. If it has a drain pump filter, follow these steps: unplug the washer, open the access panel, locate the filter, place a pan or bucket beneath it, remove the cover, allow the water to drain, clean the filter, and reattach the cover.”
Tips For Manually Draining A Washer If Water Won’t Come Out
If you find that water won’t come out of your Speed Queen washer when you attempt to drain it manually, here are a few tips to troubleshoot the issue:
-
Remove any clothes from the washer before attempting to drain the water. This will help you identify any blockages more easily.
-
Inspect the drain hose for any blockages. You can use a plumbing snake to remove any debris that may be obstructing the water flow. Ensure the plumbing snake is inserted gently to avoid damaging the hose.
-
Check for any kinks or twists in the drain hose. Straighten out any kinks or twists that you find, as this can hinder the drainage process.
-
If the above steps do not solve the problem, there may be an accumulation of dirt, debris, or lint between the basket (inner part) and the tub (encasing) that is preventing efficient water drainage. In this case, seek the assistance of a qualified technician to resolve the issue.
-
Remove any clothes from the washer before draining
- Inspect the drain hose for blockages
- Check for kinks or twists in the drain hose
- Seek the assistance of a qualified technician if problem persists
Reasons Why A Speed Queen Washer May Not Drain Properly
A Speed Queen washer may fail to drain properly due to various reasons. Understanding these reasons can help you identify the problem and find the appropriate solution. Here are some common causes for drainage issues:
-
Clogged drain hose: Over time, the drain hose may become clogged with dirt, lint, or other debris. This can obstruct the water flow and prevent proper drainage.
-
Kinks in the hose: A kinked or twisted drain hose can restrict the smooth flow of water, resulting in improper drainage. Straightening out the hose can help resolve this issue.
-
Accumulated dirt, debris, or lint: The accumulation of dirt, debris, or lint between the basket and the tub can hinder the drainage process. This problem may require the expertise of a technician to thoroughly clean and remove the obstructions.
-
Blocked or faulty drain pump: The drain pump is responsible for extracting water from the washer. A blockage or malfunction in the drain pump can lead to inefficient water extraction and poor drainage.
-
Worn-out or broken water pump belt: In older washer units, the water pump belt can wear out or break over time. Replacing the water pump belt is necessary to enable proper drainage.
-
Clogged coin trap: Some Speed Queen washers have a coin trap designed to catch dirt and particles. If this trap becomes blocked, it can hinder water flow and result in drainage issues. Regular cleaning of the trap is necessary to maintain smooth drainage.
-
Excessive soap suds: Using too much detergent can create excessive soap suds, which can obstruct water flow or result in the formation of soap scum that can clog the drain. Proper cleaning and balanced detergent usage are required to prevent drainage problems.
-
Defective lid switch assembly: The lid switch assembly plays a crucial role in the proper functioning of the washer. If the lid switch assembly is defective, it can result in drainage issues. In such cases, the lid switch assembly needs to be addressed or replaced for the washer to function properly.
Solutions For Fixing A Washing Machine That Won’t Drain
If your Speed Queen washer is not draining properly, there are several solutions you can try to resolve the issue. Here are some troubleshooting steps to fix a washing machine that won’t drain:
-
Inspect the drain hose for any blockages and remove them. Use a plumbing snake if necessary to remove debris from the hose. Ensure the drain hose is free from kinks or twists and straighten it out if needed.
-
Clean the coin trap if your Speed Queen washer has one. Remove any accumulated dirt or particles that may be blocking the trap.
-
Check the drain pump for any obstructions. Clear away any dirt, debris, or foreign objects that may be hindering the pump’s function. If the drain pump is faulty, it may need to be repaired or replaced.
-
If you have an older washer unit, check the water pump belt. If the belt is worn out or broken, it will need to be replaced to enable proper drainage.
-
Ensure you are using the correct amount of detergent for your laundry loads. Excessive soap suds can clog the drain and hinder proper waterflow. Adjust your detergent usage accordingly.
-
Inspect the lid switch assembly for any defects. Use a multimeter to test the switches in the lid assembly and replace any faulty parts if necessary.
-
If you have checked for all the above issues and are still experiencing drainage problems, it is recommended to contact Speed Queen’s customer support or a qualified technician for further assistance.
-
Inspect the drain hose for blockages.
- Clean the coin trap.
- Check the drain pump for obstructions.
- Check the water pump belt.
- Use the correct amount of detergent.
- Inspect the lid switch assembly.
- Contact Speed Queen’s customer support or a qualified technician for further assistance.
Maintaining And Troubleshooting Drainage Issues In A Speed Queen Washer
Proper maintenance and troubleshooting of drainage issues in your Speed Queen washer are essential for its continued functionality. Here are some tips to assist you in maintaining and troubleshooting drainage issues:
-
Regularly clean the drain hose and check for any blockages or kinks. Clean the hose with running water to ensure it is clear and straightened out for efficient drainage.
-
Clean the coin trap, if present, on a regular basis to prevent the accumulation of dirt or particles that could hinder water flow.
-
Use the correct amount of detergent to avoid excessive soap suds that can obstruct proper drainage. Follow the detergent manufacturer’s guidelines for optimal usage.
-
Check the lid switch assembly for any defects and promptly address any issues. A functioning lid switch assembly is crucial for proper drainage.
-
If visual inspection and basic troubleshooting do not resolve the drainage problems, contact Speed Queen’s customer support or a qualified technician for further assistance. They will be able to diagnose and fix any complex issues with your washer.
By following these guidelines and properly maintaining your Speed Queen washer, you can ensure its efficient performance and reliable drainage for years to come.
Check this out:
Frequently Asked Questions
Why is my Speed Queen not draining?
If your Speed Queen is not draining, there could be a potential issue with the drain hose. Over time, lint and hair can accumulate and block the flow of water. To address this, try using a thin, long-handled brush to clean the hose and remove any obstructions. However, it is important to note that if your washer is also not completing a cycle, a broken suspension rod might be the underlying cause. This can lead to an unbalanced tub, preventing it from spinning or agitating correctly. In such cases, inspect and replace any broken suspension rods to restore proper functionality and ensure efficient draining of your Speed Queen.
How do I drain my washing machine while on the cycle?
To drain your washing machine while it is on a cycle, you can start by pressing the “Start/Pause” button on the machine. Allow a few minutes for the washer to complete the draining process and unlock the door. Once the door is unlocked, you can open it and make any necessary adjustments to the cycle. This ensures that the water in the drum is safely removed before you proceed with any changes.
How do you drain a fully automatic washing machine?
To drain a fully automatic washing machine, begin by powering down the machine and cutting off the water supply. Once the washing cycle is complete and the clothes have been removed (if it is a top-loading machine), turn the knob from “wash” to “drain”. This will activate the draining function and allow the water to flow out of the machine. Alternatively, if you have a front-loading machine, there is typically a specific drain cycle button that can be pressed to initiate the draining process. Either way, it is important to ensure that the machine is not running and the water supply is cut off before attempting to drain it.
How do you drain a washer without running it?
To drain a washer without running it, you can follow a few simple steps. First, turn off the water supply to the machine. Then, unplug the washer from the wall outlet to ensure safety. Next, place a large bucket underneath the drain hose to catch any water that will be released. After that, use a wrench to loosen the hose clamp and carefully remove the drain hose from the washing machine. Lastly, allow the water to drain out completely.